Product ID:PAC 2007,PAC 2008,PAC 2012,PAC 2020,PAC 200
MSDS Date:01/01/1987
FSC:3439
NIIN:01-199-0065
MSDS Number: BKCGT

POWDER ALLOY CORP

12036 COOPERWOOD LN
CINCINNATI, OH 45242-6321
US

Emergency Phone: 513-984-4016

Cage: 56923

POWDER ALLOY CORP

CINCINNATI, OH 45242-6321 US

Telephone: 513-984-4016

Cage: 56923

ZIRCONIUM

CAS: 7440-67-7

RTECS: ZH7070000

Fraction By Weight: 78 - 95%

OSHA PEL 5 MG/M3/10 STEL

ACGIH TLV: 5 MG/M3/10 STEL;9192

YTTRIUM

CAS: 7440-65-5

RTECS: ZG2980000

Fraction By Weight: 5 - 22%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: 0 - 1.0%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SILICA GEL-SILICONE OXIDE

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 0 - 1.5%

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)

LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE-EYE:IRRITATION.SKIN:MAY CAUSE
DERMATITIS.INHALATION:MAY CAUSE UPPER RESPIRATORY TRACT
IRRITATION.INGESTION:MAY CAUSE NAUSEA,VOMITING &
DIARRHEA.CHRONIC-SKIN:MAY LEAD TO LESIONS & REDNESS.INHALAT ION:MAY
CAUSE FIBROTIC DISEASE.
Explanation of Carcinogenicity:THIS MATERIAL MAY CONTAIN NICKEL AND
CHROMIUM.
Effects of Overexposure:SEE HEALTH HAZARDS SECTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:GET MEDICAL CARE IF NEEDED.EYES:FLUSH THOROUGHLY WITH PLENTY
OF WATER.SKIN:WASH THOROUGHLY WITH SOAP & WATER.INHALATION:REMOVE
TO FRESH AIR.INGESTION:INDUCE VOMITING,UNLESS PATIENT IS
UNCONSCIOUS.CALL A DOCTOR.

Flash Point:NONE
Extinguishing Media:USE CLASS "D" FIRE EXTINGUISHER.
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS SHOULD BE
WORN.COMPLY WITH NFPA51B STANDARD FOR FIRE PREVENTION IN THE USE OF
CUTTING AND WELDING PROCESSES.
Unusual Fire/Explosion Hazard:PROVIDE ADEQUATE VENTILATION.MODERATE
FIRE HAZARD IN THE FORM OF DUST OR ACCUMULATION OF SUCH. IN
ADDITION,MINIMIZE AIRBORNE POWDER PARTICLES.

Spill Release Procedures:WEAR RESPIRATORY EQUIPMENT DURING CLEANUP. USE
EQUIPMENT THAT KEEPS MATERIAL FROM BECOMING AIRBORNE. TO MINIMIZE
DUST GENERATION I.E. WET MOP, HEPA VACUUM.

Handling and Storage Precautions:KEEP MATERIAL CONTAINERS CLOSED & DRY
DURING STORAGE.
Other Precautions:NO FOOD OR SMOKING IN WORK AREAS. WASH THOROUGHLY
AFTER HANDLING.HAVE SAFETY MANAGERS AND OPERATORS REVIEW
"RECOMMENDED SAFE PRACTICES FOR THERMAL SPRAY".

Respiratory Protection:DEPENDS UPON SPECIFIC USE,CONDITION,AND
LOCATION.IF THERE IS DUSTINESS, WEAR RESPIRATOR SELECTED AS
APPROVED BY NIOSH OR OSHA 1910.134 TO PROTECT OPERATOR FROM FUMES.
Ventilation:LOCAL DUST PICK UP AND VENTILATION RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:OSHA APPROVED GOGGLES
Other Protective Equipment:INSTALL EYE WASH STATION.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING.
Supplemental Safety and Health

HCC:V7
Spec Gravity:2.00
Solubility in Water:INSOLUBLE
Appearance and Odor:DUSTY POWDER WITH NO APPRECIABLE ODOR

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:OZONE AND NITRIC OXIDE ARE FORMED
DURING SPRAYING.

Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.