BKCPD - TEAM 310 ROCK HARD ENAMEL, 620 CLEAR BASE
- MSDS: BKCPD
- Manufacturer: TEAM LABORATORY CHEMICAL CORP
- Product Name: TEAM 310 ROCK HARD ENAMEL, 620 CLEAR BASE
- National Stock Number: 8010-00F015105
Product Identification
Product ID:TEAM 310 ROCK HARD ENAMEL, 620 CLEAR BASE
MSDS Date:01/01/1987
FSC:8010
NIIN:00F015105
MSDS Number: BKCPD
Responsible Party
BISMARCK, ND 58502
Emergency Phone: (701) 255-3796
Info Phone: (701) 255-3796
Cage: 37912
Contractor
Telephone: (701) 255-3796
Cage: 37912
Ingredients
MINERAL SPIRITS, PETROLEUM SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 8.6%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
RESIN TYPE II
Fraction By Weight: 68%
78 URETHANE RESIN (SPENCER KELLOGG)
Fraction By Weight: 18%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRITATION. SKIN: DRYING.
INHALATION: HEADACHE, DIZZINESS & NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE: IRRITATION. SKIN: DRYING. INHALATION:
HEADACHE, DIZZINESS & NAUSEA.
First Aid
First Aid:EYE: FLUSH W/WATER. SKIN: WASH W/MILD SOAP & WATER & APPLY
SKIN CREAM. INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL
RESPIRATION IF NECESSARY. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:105F
Extinguishing Media:WATER SPRAY, CO2, FOAM OR DRY CHEMICAL
Accidental Release
Spill Release Procedures:FLUSH W/WATER INTO RETAINING AREA OR
CONTAINERS. AVOID EXPOSURE TO SPARKS, OR HOT METAL SURFACES.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OPEN
FLAME, & HOT METAL SURFACES. AVOID PROLONGED OR REPEATED CONTACT
W/SKIN.
Other Precautions:USE W/ADEQUATE VENTILATION.
Exposure Controls
Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS FOR
CONCENTRATIONS >TLV.
Ventilation:LOCAL EXHAUST
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE BATH & SAFETY SHOWER
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:315-385F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:53%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, OR HOT METAL
SURFACES
Hazardous Decomposition Products:CO
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.