BLBCC - HEAT RESISTANT ALUMINUM, 8-H-56 (TT-P-28E)
- MSDS: BLBCC
- Manufacturer: SPRAYLAT CORP EVERSEAL DIV
- Product Name: HEAT RESISTANT ALUMINUM, 8-H-56 (TT-P-28E)
- National Stock Number: 8010-01-033-3778
Product Identification
Product ID:HEAT RESISTANT ALUMINUM, 8-H-56 (TT-P-28E)
MSDS Date:09/13/1990
FSC:8010
NIIN:01-033-3778
MSDS Number: BLBCC
Responsible Party
CHICAGO, IL 60633
US
Emergency Phone: 312-646-5900
Info Phone: 312-646-5900
Cage: MO648
Contractor
Telephone: 312-646-5900
Cage: MO648
Ingredients
RESIN
Fraction By Weight: 17%
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 23%
OSHA PEL 15MG/M3 DUST/5 FUME
ACGIH TLV: 10MG/M3 DUST; 9192
5
CAS: 64742-88-7
Fraction By Weight: 25%
30
CAS: 64742-89-8
Fraction By Weight: 31%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: DIZZINESS, NAUSEA, POSSIBLE
UNCONSCIOUSNESS. SKIN: MILDLY IRRITATING. EYES: IRRITATING.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION IF
NECESSARY. SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER
FOR AT LEAST 15 MINUTES. CONSULT PHYSICIAN. INGEST: GET MD
IMMEDIATELY (FP N).
Fire Fighting
Flash Point:55.0F,12.8C
Lower Limits:0.9%
Extinguishing Media:FOAM, CO*2 OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM. FIRE FIGHTERS SHOULD WEAR NIOSH/MSHA APPROVED SCBA.
Accidental Release
Spill Release Procedures:ENSURE ADEQUATE VENTILATION, REMOVE IGNITION
SOURCES. ADSORB SMALL SPILLS ON DRY ADSORPTION MATERIAL. USE
SPARK-PROOF SCOOP FOR LARGER SPILLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM MOSITURE. AVOID
EXCESSIVE HEAT. KEEP AWAY FROM IGNITION SOURCES.
Other Precautions:NPCA/HMIS RATING 3,3,0,H.
Exposure Controls
Respiratory Protection:IF TLV EXCEEDED USE NIOSH/MSHA APPROVED
CARTRIDGE VAPOR MASK.
Ventilation:LOCAL EXHAUST SUFFICIENT TO ENSURE LEL NOT ACHIEVED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:245F,118C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:0.95
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:74
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS OR ALKALIES CAUSE VIOLENT REACTION. STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:MOISTURE CAUSES HYDROGEN GAS BUILD-UP.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE ON
COMBUSTION.
Disposal
Waste Disposal Methods:AS PER STATE, LOCAL AND FEDERAL REGULATION FOR
HAZARDOUS MATERIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.