Product ID:PLY-TILE 700 GLOSS & SEMI GLOSS COATING PAR
MSDS Date:04/22/1988
FSC:8010
NIIN:00N016157
MSDS Number: BLBMP

M A BRUDER & SONS INC

600 REED ROAD
BROOMALL, PA 19008
US

Emergency Phone: 215-353-5100 215-853-2051

Info Phone: 215-353-5100

Cage: 85519

M A BRUDER & SONS INC

600 BROOMALL, PA 19008 US

Telephone: 610-353-5100;610-359-3635

Cage: 85519

OR CHEMICAL FUMES. RAGS OR WASTE CONTAINING OIL

RTECS: 9999999ZZ

INTERFACES WILL OXIDIZE & MAY IGNITE SPONT & SHOULD

RTECS: 9999999ZZ

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 14-42%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SILICONE DIOXIDE

CAS: 68855-54-9

Fraction By Weight: 18%

OSHA PEL 0.08MG/M3 TDUST(MFR)

ACGIH TLV: 10 MG/M3 TDUST (MFR)

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 17%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 5-16%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

PROPYLENE GLYCOL MONOMETHYL ETHER

CAS: 107-98-2

RTECS: UB7700000

Fraction By Weight: 1-3%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

ACETIC ACID, 2-METHOXY-1-METHYLETHYL ESTER.

CAS: 108-65-6

RTECS: AI8295000

Fraction By Weight: 3-8%

EPOXY MODIFIED ESTER RESIN

Fraction By Weight: <3%

TINTING PIGMENTS (TINTING COLOR)

Fraction By Weight: <3%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL: CAN CAUSE ANESTHETIC REACTION.
POSSIBLE ACUTE NERVOUS SYSTEM DEPRESSION OR IRRIT OF RESP TRACT
CHARACT BY THE FOLLOWING STEPS: HEADACHE, DIZZINESS, STAGGERING
GAIT, CONFUSION UNCONSCIOUSNESS AN D COMA. NOTE: INTENTIONAL MISUSE
BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS MAY BE
HARMFUL OR FATAL.
Explanation of Carcinogenicity:CRYSTALLINE SILICA:GROUP 2A (IARC).
Effects of Overexposure:SKIN/EYE: MAY CAUSE SLIGHT TRANSIENT EYE IRRIT.
MAY CAUSE ALLERGIC SKIN RXN IN SUSCEPTIBLE INDIVIDUALS. RPTD EXPOS
MAY CAUSE SKIN IRRIT. PRLNG EXPOS NOT LIKELY TO CAUSE SENSIT SKIN
IRRIT. SKIN SENSIT MAY RESULT FROM RPTD EXPOS. OTHERWISE,THE EFTS
OF EXCESSIVE, CHRONIC EXPOS HAVE NOT BEEN FULLY INVESTIGATED.
Medical Cond Aggravated by Exposure:MAY CAUSE ALLERGIC SKIN REACTION IN
SUSCEPTIBLE INDIVIDUALS.

First Aid:VAPORS: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP WARM
AND QUIET. CALL MD. EYE: FLUSH IMMEDIATLEY WITH LARGE AMOUNTS OF
WATER FOR AT LEAST 15 MIN. CONSULT MD FOR SPECIAL MEDICAL
TREATMENT. SKIN: W ASH AFFECTED ARE WITH SOAP AND WATER. REMOVE
CONTAMINATED CLOTHING. CONSULT MD.

Flash Point Method:SCC
Flash Point:115F,46C
Lower Limits:SEE INGRED
Extinguishing Media:ANY APPRVD CLASS B FIRE EXTING OR EXTING AGENT MAY
BE USED FOR FIRE FIGHTING PURPOSES, E.G. CO*2, DRY CHEMICAL AND
FOAM.
Fire Fighting Procedures:FULL PROTECTIVE EQUIP INCL NIOSH/MSHA APPROVED
SCBA SHOULD BE USED. WATER SPRAY MAY BE INEFT. IF H*2O IS USED, FOG
NOZZLES ARE PREFERED. (SEE SUPP DATA).
Unusual Fire/Explosion Hazard:COMBUST:KEEP CONTR TIGHTLY CLSD. ISOLATE
FROM HEAT & FLAME. CLSD CONTR MAY EXPLODE WHEN EXPOS TO EXTREME
HEAT. APPLICATION TO HOT SURFACES REQ (SEE SUPP DATA).

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAME AND HOT
SURFACES). VENTILATE AREA AND AVOID BREATHING VAPORS. CONTAIN AND
REMOVE WITH INERT ABSORBENT MATERIAL USING NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE IN SUN OR ABOVE 120
DEGREE F. OSHA STORAGE CATEGORY:STORE LARGE QUANTITIES IN BUILDINGS
DESIGNED FOR STORAGE OF FLAMM OR COMBUST LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY. DO NOT WELD/FLAME CUT W/O
PROPER VENT TO INSURE AREA IS FREE OF FLAMM VAPS. DO NOT CUT,
PUNCTURE/WELD ON/NEAR CNTNR. ENTRANCE INTO CLSED STOR TANKS:USE
APPROP RESP/AIR LINE FOR POSS EXPOS TO SOLVENT (SEE INGRED 9)

Respiratory Protection:NIOSH/MSHA APPRVD CHEM MECHANICAL FILTER RESP
DESIGNED TO REMOVE A COMBINATION OF PARTICULATE AND VAPORS.
Ventilation:ALL APPLICATION AREAS SHOULD BE VENTILATED IN ACCORDANCE
W/OSHA REGULATION 29 CFR 1910 DURING USE AND UNTIL VAPOR FREE.
Protective Gloves:IMPERVIOUS GLOVES REQUIRED DURING USE.
Eye Protection:CHEMICAL WORKERS SAFETY GOGGLES.
Other Protective Equipment:USE PROTECTIVE SKIN CREAM. WEAR CLEAN
UNCONTAMINATED CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: WATER MAY BE USED TO COOL CLOSED CONTAINERS, PREVENT
PRESSURE BUILD UP AND POSSIBLE AUTO IGNITION OR EXPLOSION WHEN
EXPOSED TO EXTREME HEAT. EXPLOS HAZ: SPECIAL PREC. DURING EMERGENCY
COND. OVEREXPOS TO DECOMP PROD MAY CAUSE A HLTH HAZ. SYMP MAY NOT
BE IMMED APPARENT. OBTAIN MEDICAL ATTENT.

HCC:F4
Boiling Pt:B.P. Text:243F,117C
Vapor Pres:SEE INGRED
Vapor Density:1
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:23-33

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS OR BASES AND SELECTED AMINES.
CONSIDERABLE HEAT MAY BE RELEASED WITH THESE MATLS.
Stability Condition to Avoid:HIGH TEMP AND FLAME
Hazardous Decomposition Products:IF INVOLVED IN FIRES (FROM OTHER
SOURCES) COULD CONCEIVABLY RESULT IN RELS OF CO*2, CO, ALDEHYD AND
ACIDS.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.