BLBRQ - CARBURIZING STOP-OFF COATING WATER BASE
- MSDS: BLBRQ
- Manufacturer: AVION MANUFACTURING CO
- Product Name: CARBURIZING STOP-OFF COATING WATER BASE
- National Stock Number: 8010-00N016481
Product Identification
Product ID:CARBURIZING STOP-OFF COATING WATER BASE
MSDS Date:07/01/1988
FSC:8010
NIIN:00N016481
MSDS Number: BLBRQ
Responsible Party
EASTLAKE, OH 44094
US
Emergency Phone: 216-951-0020
Info Phone: 216-951-0020
Cage: 0BCH6
Contractor
Telephone: 216-951-0020
Cage: 0BCH6
Ingredients
MAGNESIUM SILICATE
Fraction By Weight: 2%
2-BUTOXYETHANOL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 2%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
BORIC ACID
CAS: 10043-35-3
RTECS: ED4550000
Fraction By Weight: 31%
RESIN (ACRYLIC LATEX)
Fraction By Weight: 63%
SOLVENT/WATER
PIGMENT
Fraction By Weight: 2%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE CONTACT MAY CAUSE
IRRITATION. CHRONIC: REPEATED SKIN CONTACT MAY CAUSE RASH.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SKIN RASH IF ALLERGIC REACTION TO CONTACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST: DILUTE WITH WATER OR MILK AND INDUCE VOMITING. EYE:
FLUSH WITH CLEAN WATER FOR AT LEAST 15 MINUTES. SKIN: WASH HANDS
WITH SOAP AND WATER AFTER USING. INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATH ING (GIVE 0*2/ARTF RESP) .
Fire Fighting
Flash Point:NONE
Extinguishing Media:MATERIAL IS NON-FLAMMABLE AQUEOUS BASE.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:WIPE UP OR WASH DOWN DRAIN.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE. STORE IN WARM AREA TO PREVENT
FREEZING.
Other Precautions:NONE NEEDED.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTIVE
DEVICE SUITABLE FOR THE EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:ONLY IF ALLERGIC.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:17
Vapor Density:0.62
Spec Gravity:1.24
Solubility in Water:MISCIBLE
Appearance and Odor:LIGHT GREEN, MILD CHARACTERISTIC ACRYLIC ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:NORMAL. DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.