Product ID:FX-763 A COMPONENT
MSDS Date:09/01/1988
FSC:8040
NIIN:00N016849
Kit Part:Y
MSDS Number: BLBWB

Emergency Phone: 301-243-8856

Info Phone: 301-243-8856

Cage: 8U180

Telephone: 301-243-8856

Cage: 8U180

EPOXY RESIN

CAS: 25085-99-8

SILICA GEL (SILICON DIOXIDE)

CAS: 7631-86-9

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE EYE IRRITATION. CAN CAUSE
ALLERGIC SKIN RESPONSE. NO HAZARDS ANTICIPATED FROM INGESTION
INCIDENTAL TO INDUSTRIAL EXPOSURE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SKIN OR EYE IRRITATION.
Medical Cond Aggravated by Exposure:SKIN SENSITIZATION

First Aid:EYE:FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN:WASH W/SOAP &
WATER. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP), CALL MD . INGEST:GET MD IMMEDIATELY .

Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, FOAM, WATER SPRAY, DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED POSITIVE PRESSURE
SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SCOOP UP MATERIAL & COLLECT IN SUITABLE
CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED.
Other Precautions:AVOID BREATHING VAPORS AND CONTACT W/HEATED
MATERIALS.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLEAN, LONG SLEEVED SHIRT & LONG PANT WORK
CLOTHES.
Work Hygienic Practices:GOOD HOUSEKEEPING.
Supplemental Safety and Health
KEY1:N1.

HCC:C2
Vapor Density:>1
Spec Gravity:1.1
Solubility in Water:SLIGHT
Appearance and Odor:WHITISH PASTE, SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG BASES
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, AROMATIC STRUCTURES

Waste Disposal Methods:BURN IN ADEQUATE INCINERATORS. BURY IN APPROVED
LANDFILL I/A/W FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.