Product ID:ACRAGLAS GEL RESIN
MSDS Date:03/16/1990
FSC:8040
NIIN:00N017174
Kit Part:Y
MSDS Number: BLCCT

Emergency Phone: 515-623-5401

Info Phone: 515-623-5401

Cage: 12238

Telephone: 515-623-5401

Cage: 12238

PROPANE,2,2-BIS(P- 2,3-EPOXYPROPOXY PHENYL)- (DIGLYCIDYL

CAS: 1675-54-3

RTECS: TX3800000

Fraction By Weight: 90%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:SKIN IRRITATION. POTENTIAL SKIN
SENSITIZER. PROLONGED OR REPEATED CONTACT MAY CAUSE SKIN
IRRITATION. MINOR EYE IRRITATION.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: REMOVE WITH WARM SOAPY WATER. EYES: FLUSH WITH CLEAR
WATER FOR AT LEAST 15 MINUTES. CONSULT A PHYSICIAN. INHAL: REMOVE
PERSON TO FRESH AIR. INGEST: CALL MD IMMEDIATELY .

Flash Point Method:CC
Flash Point:470F,243C
Extinguishing Media:CO*2 OR DRY CHEMICALS, POLYMER FOAMS FOR LARGE
FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . AVOID BREATHING SMOKE.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:AVOID SKIN CONTACT. ABSORB WITH SWEEPING
COMPOUND OR OTHER ABSORBENT MATERIAL & DISPOSE OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE WITH ADEQUATE VENTILATION. AVOID
SKIN CONTACT. STORE IN A COOL, DRY PLACE. HANDLE I/A/W HAZ
POTENTIALITIES OF CURING AGENT WHEN MIXED THEREWITH.
Other Precautions:HEAT GENERATED WHEN MIXING WITH EPOXY HARDNER. USE
CAUTION WHEN MIXING LARGE QUANTITIES.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST WHEN USED WITH HARDNER.
Protective Gloves:RUBBER OR DISPOSABLE.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT APPLICABLE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Vapor Pres:NIL
Spec Gravity:1.2
Solubility in Water:NIL
Appearance and Odor:WHITE GEL, PRACTICALLY ODORLESS.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:OPEN FLAMES OR EXCESSIVE HEAT.
Hazardous Decomposition Products:CO*X, NO*X, ALDEHYDES AND ACIDS.

Waste Disposal Methods:BURY IN APPROVED CHEMICAL LANDFILL OR IN
ACCORDANCE WITH STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.