Product ID:DARINA GREASE AX, 70330
MSDS Date:08/07/1989
FSC:9150
NIIN:00N017193
MSDS Number: BLCDF

SHELL OIL COMPANY

HOUSTON, TX 77210
US

Emergency Phone: 713-473-9461 800-424-9300(CHEMTREC)

Info Phone: 713-241-4819

Cage: 54572

SHELL OIL COMPANY

HOUSTON, TX 77210 US

Telephone: 713-241-4819

Cage: 54572

BENTONITE (INORGANIC CLAY)

CAS: 1302-78-9

RTECS: CT9450000

Fraction By Weight: 5%

FATTY ACID AMIDES

CAS: 68910-93-0

Fraction By Weight: 4%

SODIUM NITRITE (SARA III)

CAS: 7632-00-0

RTECS: RA1225000

Fraction By Weight: <1%

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

OTHER COMPONENTS

Fraction By Weight: <0.1%

TO FRESH AIR & PROVIDE O*2 IF BRTHG IS DIFFICULT.

RTECS: 9999999ZZ

NO TREATMENT IS NEC UNLESS LRG QTYS OF PROD ARE

RTECS: 9999999ZZ

GEN, EMESIS INDUCTION IS UNNECESSARY IN HIGH

RTECS: 9999999ZZ

NORMAL USE OF THIS PRODUCT SHOULD NOT RESULT IN

RTECS: 9999999ZZ

OF ACCIDENTAL INGESTION,SODIUM NITRATE MAY ALTER THE

RTECS: 9999999ZZ

CYANOSIS(BLUISH SKIN),SHORTNESS OF

RTECS: 9999999ZZ

MINERAL OIL, PETROLEUM DISTILLATES, HYDRO TREATED HEAVY

CAS: 64742-52-5

RTECS: PY8035000

Fraction By Weight: 65%

OSHA PEL 300 PPM;500 PPM STEL

ACGIH TLV: 300 PPM;500 PPM STEL

RESIDUAL OILS, HYDROTREATED

CAS: 64742-57-0

Fraction By Weight: 25%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE: MAY BE MILDLY IRRIT TO EYES.
SKIN: PRLNGD/RPTD CONTACT MAY CAUSE VARIOUS SKIN DISORDERS SUCH AS
DERM, FOLLICULITIS/OIL ACNE. RELS DURING HIGH PRESS USAGE MAY RSLT
IN INJECTION OF OIL INTO SKIN CA USING LOCAL NECROSIS. INHAL: NO
SPECIFIC INFORMATION IDENTIFIED. INGEST: NO SPECIFIC INFORMATION
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:MINERAL OIL CAS # 64742-52-5 LISTED IN
RTECS ASIARC GROUP 1.
Effects of Overexposure:HLTH HAZ: IDENTIFIED. SIGNS AND SYMPTOMS: IRRIT
AS NOTED ABOVE. LOCAL NECROSIS IS EVIDENCED BY DELAYED ONSET OF
PAIN AND TISSUE DAMAGE. OTHER HLTH EFTS: THIS SPECIFIC PROD HAS NOT
BEEN TESTED IN LONG- TERM, CHRONIC EXPOS TESTS. LUBRICATING GREASES
ARE GEN CONSIDERED TO BE OF LOW ORDER OF ACUTE TOXICITY (SEE SUPP
DATA)
Medical Cond Aggravated by Exposure:PREEXISTING SKIN DISORDERS MAY BE
AGGRAVATED BY EXPOS TO PROD.

First Aid:EYE:FLUSH W/H*2O FOR AT LEAST 15 MIN WHILE HOLDING EYELIDS
OPEN. GET MD ATTN. SKIN:REMOVE CONTAM CLTHG & WIPE EXCESS OFF. WASH
W/SOAP & H*2O/WATERLESS HAND CLEANER FOLLOWED BY SOAP & H*2O. DO
NOT REUS E CLTHG UNTIL THORO CLEANED. IF IRRIT PERSISTS, GET MD
ATTN. IF MATL IS INJECTED UNDER SKIN, GET MD ATTN PROMPTLY TO PVNT
SERIOUS DAMAGE: DO NOT WAIT FOR SYMP DEVELOP. INHAL:REMOVE (SEE
SUPP DATA)

Flash Point Method:PMCC
Flash Point:430F,221C
Extinguishing Media:USE H*2O FOG, DRY CHEMICAL/CO*2. DO NOT USE A
DIRECT STREAM OF H*2O. PROD WILL FLOAT & CAN BE REIGNITED ON SURF
OF H*2O.
Fire Fighting Procedures:DO NOT ENTER CONFINED FIRE SPACE W/OUT PROPER
PROT EQUIP INCLUDING A NIOSH/MSHA APPRVD SCBA. COOL FIRE EXPOSED
CNTNRS SURROUNDING EQUIPMENT & STRUCTURES W/H*2O.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SCOOP UP EXCESS GREASE. CLEAN AREA
W/APPROPRIATE CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY PLACE W/ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH TEMPERATURES.
Other Precautions:MINIMIZE SKIN CONTACT. WASH WITH SOAP & WATER BEFORE
EATING, DRINKING, SMOKING OR USING TOILET FACILITIES. LAUNDER
CONTAM CLTHG BEFORE REUSE. PROPERLY DISPOSE OF CONTAM LEATHER
ARTICLES, INCLUDING SHO ES, THAT CANNOT BE DECONTAMINATED.

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:OIL RESISTANT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:PARTICULATES & GASES WILL EVOLVE WHEN MATL UNDERGOES
PYROLYSIS/COMBUST.CO & UNIDENTIFIED ORG COMPOUNDS MAY BE FORMED
UPON COMBUST.EFTS OF OVEREXP:TO HUMANS & EXPTAL ANIMALS.HOWEVER,HND
LG PROC & SFTY PREC IN MSDS SHOULD BE FOLLOWED TO MINIMIZE
EMPLOYEE'S EXPOS(SEE ING 10).FIRST AID PROC:VICTIM(SEE ING 7)

HCC:V6
Solubility in Water:INSOLUBLE
Appearance and Odor:BROWN, SMOOTH, SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT, OPEN FLAME AND CONTACT WITH
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:THERMAL DECOMP PROD ARE HIGHLY
DEPENDENT ON COMBUST CONDITIONS. A COMPLEX MIXTURE OF AIRBORNE
SOLID, LIQ(SEE SUPP DATA)

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.