BLCFB - EPOXY HARDNER, 10-347-2R

  • MSDS: BLCFB
  • Manufacturer: GC ELECTRONICS
  • Product Name: EPOXY HARDNER, 10-347-2R
  • National Stock Number: 8040-00N017241
Product Identification

Product ID:EPOXY HARDNER, 10-347-2R
MSDS Date:01/10/1990
FSC:8040
NIIN:00N017241
MSDS Number: BLCFB

Responsible Party
GC ELECTRONICS
1801 MORGAN ST
ROCKFORD, IL 61105-1209
US

Emergency Phone: 815-968-9661

Info Phone: 815-968-9661

Preparer: VERE HAGEMAN

Cage: 72653

Contractor
GC THORSEN
ROCKFORD, IL 61105 US

Telephone: 815-968-9661

Cage: 72653

Ingredients

POLYAMIDE CURING AGENT

Fraction By Weight: 65%


TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 10%


SILICON DIOXIDE, AMORPHOUS;(INERT FILLER SIO*2 )

CAS: 7631-86-9

Fraction By Weight: 25%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATING TO SKIN AND EYES. MAY CAUSE
SENSITIZATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES, CALL MD.
SKIN:WASH WITH SOAP AND WATER. INHAL:REMOVE TO FRESH AIR. GIVE
OXYGEN IF NECESSARY, CALL MD. INGEST:INDUCE VOMITING. CALL MD.

Fire Fighting

Flash Point Method:CC
Flash Point:275F,135C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTION PRODUCTS MAY BE TOXIC.

Accidental Release

Spill Release Procedures:SCRAPE UP AND PLACE IN CLOSED CONTAINER FOR
DISPOSITION. AVOID SKIN CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN DRY, WELL VENTILATED AREA AT
ROOM TEMPERATURE.
Other Precautions:KEEP CONTAINERS TIGHTLY SEALED.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED CARTRIDGE RESPIRATOR IF
VENTILATION IS INADEQUATE.
Ventilation:LOCAL EXHAUST, MECHANICAL (GENERAL) EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Appearance and Odor:PALE GREEN PASTE, SLIGHT AMINE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:LONG TERM HIGH TEMPERATURE STORAGE.
Hazardous Decomposition Products:CO & CO*2.

Disposal

Waste Disposal Methods:LICENSED INCINERATOR, OR IN ACCORDANCE WITH
LOCAL, STATE, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.