BLCKQ - SAVIN PRISM I PHOTOCONDUCTOR BELT, FC 2207-
- MSDS: BLCKQ
- Manufacturer: COLOROCS CORP
- Product Name: SAVIN PRISM I PHOTOCONDUCTOR BELT, FC 2207-
- National Stock Number: 3610-00N017478
Product Identification
Product ID:SAVIN PRISM I PHOTOCONDUCTOR BELT, FC 2207-
MSDS Date:07/19/1989
FSC:3610
NIIN:00N017478
MSDS Number: BLCKQ
Responsible Party
NORCROSS, GA 30071
US
Emergency Phone: 404-448-9799
Info Phone: 404-448-9799
Cage: CLRCS
Contractor
Telephone: 203-967-5000
Cage: 29382
Ingredients
RESIN; (BINDER)
PHOTOSENSITIVE MATERIAL
PIGMENT
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
OSHA PEL 15MG/M3 DUST/5 FUME
ACGIH TLV: 10MG/M3 DUST; 9192
POLY(OXYETHYLENE OXYTEREPHTHALOYL); (POLYETHYLENE
CAS: 25038-59-9
RTECS: TR2725000
POLYDIMETHYLSILOXANE RUBBER; (SILICONE RUBBER)
CAS: 63394-02-5
RTECS: TQ2700000
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH W/POTABLE WATER FOR AT LEAST 15 MIN. SEE MD .
INGEST:CALL MD IMMED . INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING
(GIVE O*2/ART RESP) CALL MD .
Fire Fighting
Extinguishing Media:WATER SPRAY, FOAM, CO*2, DRY POWDER, EXTINGUISHERS.
Fire Fighting Procedures:MATL WILL BURN IN CASE OF FIRE. USE NIOSH/MSHA
APPRVD SCBA & FULL PROT EQUIP .
Unusual Fire/Explosion Hazard:MATL HAS NO UNUSUAL FIRE OR EXPLOSION
HAZARDS.
Accidental Release
Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS ARE
NEEDED FOR SAFETY REASONS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD RESP APPROP FOR EXPOSURE OF
CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:UNDER NORMAL INTENDED USE NO PROT CLOTHING
NOR SPECIAL EQUIP ARE REQD.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:1.4
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FLEXIBLE PIGMENTED PLASTIC BELT W/ALUMINIZED
INTERIOR SURF. NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2 & NO*X.
Disposal
Waste Disposal Methods:LANDFILL OR INCIN IN COMPLIANCE W/FED, STATE &
LOCAL REG.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.