Product ID:BARE ALUMINUM WELDING WIRE, 5183
MSDS Date:04/16/1991
FSC:3439
NIIN:00N018251
MSDS Number: BLCPB

ALL-STATE WELDING PRODUCTS INC.

5112 ALLENDALE LN
TANEYTOWN, MD 21787
US

Emergency Phone: 800-638-1647 OR 717-637-8911

Info Phone: 800-638-1647 OR 717-637-8911

Cage: 69482

ALL-STATE PRODUCTS/ DIV OF ESAB GROUP,INC

600 TANEYTOWN, MD 21787 US

Telephone: 1-410-756-4330

Cage: 69482

RAYS CAN INJURE EYES AND BURN SKIN. ELECTRIC

RTECS: 9999999ZZ

NEXT SHADE LIGHTER WHICH GIVES ADEQUATE VIEW.

RTECS: 9999999ZZ

(IRON DEPOSITS IN LUNG) & IS BELIEVED BY

RTECS: 9999999ZZ

SILICON

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

COBALT (SARA III)

CAS: 7440-48-4

RTECS: GF8750000

OSHA PEL 0.1 MG/M3;AS CO

ACGIH TLV: 0.05 MG/M3;DUST 9293

ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

MAGNESIUM

CAS: 7439-95-4

RTECS: OM2100000

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TITANIUM

CAS: 7440-32-6

RTECS: XR1700000

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACGIH REC GEN LIMIT FOR WELDING FUME
NOC (NOT OTHERWISE CLASSIFIED) IS 5 MG/M3. ACGIH 1984-85 PREFACE
STATES:"TLV- TWA SHOULD BE USED AS GUIDES IN CONTROL OF HLTH HAZ &
SHOULD NOT BE USED AS FIRM LINE S BTWN SAFE & DANGEROUS CONC."
WELDING FUMES CANNOT BE CLASSIFIED SIMPLY. REFER TO
ANSZ-49.1/ORIGINAL MSDS FOR MORE INFO
Explanation of Carcinogenicity:CHROMIUM:IARC GROUP 1, NTP GROUP 1.
Effects of Overexposure:FUMES & GASES CAN BE DANGEROUS TO YOUR HEALTH.
SHORT-TERM (ACUTE) OVEREXP TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS:DIZZ, NAUS, OR DRYNESS OR IRRIT OF NOSE, THROAT
OR EYES. LONG TERM (CHRONIC) OVEREXP MAY LEAD TO SIDEROSIS (SEE
ING11)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY THE AMERICAN RED CROSS. INGEST: CALL MD IMMEDIATELY . INHAL:
REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTIFICIAL
RESPIRATI ON) . EYE:IMMEDIATELY FLUSH EYES WITH POTABLE WATER FOR A
MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD . SKIN: FLUSH WITH
COPIOUS AMOUNTS OF WATER. CALL MD. .

Flash Point:NONFLAMMABLE
Extinguishing Media:USE EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA WITH FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLES. SEE ANSZ-49.1, SAFETY IN WELDING & CUTTING.

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TRAIN WELDER NOT TO TOUCH LIVE
ELECTRICAL PARTS AND TO INSULATE HIMSELF FROM WORK & GROUND.
Other Precautions:EXPOS LEVEL FOR WELDING FUME HAS BEEN ESTABLISHED AT
5 MG/M3 W/OSHA'S PEL & ACGIH'S TLV BUT FUME LIMITS FOR SOME CHEM
MAY BE REACHED BEFORE GEN FUME LIMIT IS REACHED. MONITOR FUMES FOR
CHEM WHOSE PEL/ TLV ARE BELOW 5 MG/M3.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME OR AIR
SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL
EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT ARC, OR BOTH, TO KEEP
FUMES & GASES BELOW TLV'S IN WORKER'S BREATHING ZONE (SUP DAT).
Protective Gloves:WELDERS GLOVES.
Eye Protection:WELDERS HELMET OR FACESHIELD (SUP DAT).
Other Protective Equipment:WEAR PROT WHICH HELPS TO PVNT INJURY FROM
RADIA, SPARKS AND ELECTRICAL SHOCK. MAY INCLUDE ARM PROTECTION,
(SUPP DATA)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENT:& GEN AREA. TRAIN WELDER TO KEEP HIS HEAD OUT OF FUMES. OTHER PROT
EQPT:APRONS, HATS, SHOULDER PROT, AS WELL AS DARK SUBSTANTIAL
CLTHG. PROVIDE PROTECTIVE SCREENS AND FLASH GOGGLES AS NEEDED TO S
HIELD OTHERS. EYE PROT:WITH FILTER LENS. AS RULE OF THUMB, START
W/SHADE TOO DARK TO SEE WELD ZONE AND GO TO (ING 13).

HCC:N1
Appearance and Odor:BARE ALUMINUM WELDING WIRE.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FLUORIDES AND COMPLEX OXIDES OF THE
CHEMICALS LISTED IN INGREDIENT SECTION, CO, CO2, OZONE, NOX.

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER, OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE A ND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.