BLCVM - BONSAL CONSTRUCTION GROUT NON-METALLIC

  • MSDS: BLCVM
  • Manufacturer: W R BONSAL COMPANY
  • Product Name: BONSAL CONSTRUCTION GROUT NON-METALLIC
  • National Stock Number: 5610-00N019479
Product Identification

Product ID:BONSAL CONSTRUCTION GROUT NON-METALLIC
MSDS Date:02/07/1991
FSC:5610
NIIN:00N019479
MSDS Number: BLCVM

Responsible Party
W R BONSAL COMPANY
CHARLOTTE, NC 28224
US

Emergency Phone: 704-525-1621

Info Phone: 704-525-1621

Preparer: FRED GOEMAN

Cage: GO180

Contractor
W R BONSAL COMPANY
CHARLOTTE, NC 28224 US

Telephone: 704-525-1621

Cage: GO180

Ingredients

PORTLAND CEMENT

CAS: 65997-15-1

RTECS: VV8770000

Fraction By Weight: <25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


CEMENT (EXPANSIVE)

Fraction By Weight: <25%

ACGIH TLV: 30 MPPCF (MFR)


SILICA SAND

CAS: 7631-86-9

Fraction By Weight: <60%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3 TDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WHEN WET, CONTACT WITH SKIN OR EYES
MAY RESULT IN IRRITATION AND/OR ALKALI BURNS. EXCESSIVE EXPOSURE BY
INHALATION FOR AN EXTENDED TIME MAY RESULT IN DEVELOPMENT OF
PULMONARY DISEASES INCLUDING PNEUMO CONIOSIS AND SILICOSIS.
PROLONGED CONTACT CAN PRODUCE SKIN IRRITATION AND DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE FROM EXPOSURE. EYE: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. CALL MD. SKIN: WASH WITH SOAP AND WATER. INGEST:
CALL MD IMMEDIATELY .

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:NONE REQUIRED.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:USE PROTECTIVE EQUIPMENT TO PREVENT DUST
EXPOSURE AND ALKALI BURNS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE TO PREVENT CONTACT WITH STRONG
ACIDS. AVOID UNINTENTIONAL CONTACT WITH WATER TO PRESERVE PRODUCT.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR FOR PROTECTION
AGAINST SILICA AND NUISANCE DUST.
Ventilation:LOCAL EXHAUST - MAINTAIN BELOW TLV/PEL.
Protective Gloves:RUBBER, PVC, NEOPRENE.
Eye Protection:CHEM WORK GOGG. ADD FULL (SUPP DATA)
Other Protective Equipment:RUBBER HIGH TOP BOOTS, ARM SLEEVES AND APRON
TO PREVENT SKIN CONTACT. EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EYE PROT: LENGTH FACESHIELD TO GOGGLES .

Chemical Properties

HCC:N1
Spec Gravity:3.1
Evaporation Rate & Reference:NONE
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY SANDED POWDER.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
HIGHLY ALKALINE, STRONG ACIDS MAY CAUSE EXOTHERMIC RXN/TOXIC GASES OR
VAPORS, DEPENDING ON ACID INVOLVED.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:NOT APPLICABLE.

Disposal

Waste Disposal Methods:IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.