BLHZL - A + B EPOXY PUTTY PART A, EP8002

  • MSDS: BLHZL
  • Manufacturer: GEM PRODUCTS INC
  • Product Name: A + B EPOXY PUTTY PART A, EP8002
  • National Stock Number: 8040-00N020676
Product Identification

Product ID:A + B EPOXY PUTTY PART A, EP8002
MSDS Date:01/02/1990
FSC:8040
NIIN:00N020676
MSDS Number: BLHZL

Responsible Party
GEM PRODUCTS INC
12472 EDISON WAY
GARDEN GROVE, CA 92641
US

Emergency Phone: 714-898-2788

Info Phone: 714-898-2788

Cage: 91714

Contractor
GEM PRODUCTS INC
IRVING, TX 75061-8826 US

Telephone: 714-898-2788

Cage: 91714

Ingredients

NON HAZARDOUS INGREDIENT

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:NO KNOWN ADVERSE EFFECTS.
SKIN:MAY CAUSE IRRITATION. NON TOXIC BY PERCUTANEOUS ABSORPTION.
EYE:MAY CAUSE IRRITATION & BURNS. INGEST:NO KNOWN ADVERSE EFFECTS.
ACUTE:MAY CAUSE SEVERE IRRITATION. C HRONIC:MAY CAUSE
SENSITIZATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:FLUSH IMMEDIATELY W/COPIOUS AMOUNTS OF WATER FOR AT LEAST
15 MINS. SEEK MEDICAL AID. SKIN:WASH W/SOAP & WATER OR WATERLESS
HAND CLEANERS. INHAL:REMOVE TO FRESH AIR. INGEST:SEEK MEDICAL AID
IF UNUS UAL SYMPTOMS DEVELOP.

Fire Fighting

Flash Point Method:TCC
Flash Point:470F,243C
Extinguishing Media:WATER SPRAY, FOAM, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:SCRAPE UP EXCESS (ABSORBENTS MAY BE USED).
WASH DOWN W/ACETONE, IPA OR CHLORINATED SOLVENTS TAKING CARE TO
OBSERVE FIRE & TOXIC HAZARDS OF SOLVENTS USED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL AREA IN CLOSED
CONTAINERS.
Other Precautions:FOR INDUSTRIAL USE ONLY. AVOID GROSS CONTAMINATION OF
SKIN & EYE CONTACT. IF EYE CONTACT OCCURS FLUSH PROMPLTY W/PLENTY
OF WATER & SEEK MEDICAL AID.

Exposure Controls

Respiratory Protection:NOT NEEDED.
Ventilation:NOT REQUIRED EXCEPT FOR COMFORT.
Protective Gloves:NONE REQD IF AREAS OF CONT (SUPP DATA)
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PROT GLOVES:ARE WASHED REASONABLY SOON AFTER CONTACT OCCURS.

Chemical Properties

HCC:N1
Spec Gravity:1.95
Solubility in Water:INSOLUBLE
Appearance and Odor:VERY LIGHT GREY COLORED PUTTY, MILD EPOXY ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE.

Disposal

Waste Disposal Methods:STANDARD INDUSTRIAL WASTE DISPOSAL. DISPOSAL
MUST BE IN ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.