BNBDM - PRISMA AP.H

  • MSDS: BNBDM
  • Manufacturer: CAULK DENTSPLY
  • Product Name: PRISMA AP.H
  • National Stock Number: 6520-01-317-1642
Product Identification

Product ID:PRISMA AP.H
MSDS Date:07/27/1988
FSC:6520
NIIN:01-317-1642
MSDS Number: BNBDM

Responsible Party
CAULK/DENTSPLY
LAKEVIEW AND CLARKE AVE
MILFORD, DE 19963
US

Emergency Phone: 302-422-4511

Info Phone: 302-422-4511

Cage: 11107

Contractor
CAULK/DENTSPLY
359 MILFORD, DE 19963-0359 US

Telephone: 302-422-4511/ 703-451-1900

Cage: 11107

Ingredients

NON HAZARDOUS INGREDIENT

Fraction By Weight: 100%

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PERSONS SUSCEPTIBLE TO METHACRYLATES,
ACRYLATES AND URETHANES MAY DEVELOP ALLERGIC RESPONSES.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:DERMAL REDNESS OR IRRITATION, SEVERE ALLERGIC
RESPONSE MAY RESULT IN BREATHING DIFFICULTIES.
Medical Cond Aggravated by Exposure:ALLERGIES TO METHYACRYLATES,
ACRYLATES AND URETHANES.

First Aid

First Aid:INGESTION-CONSULT A PHYSICIAN. SKIN CONTACT-WASH WITH SOAP
AND WATER. EYE CONTACT-FLUSH WITH WATER FOR 15 MINUTES AND CONSULT
A PHYSICIAN.

Fire Fighting

Extinguishing Media:SAND, FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:FIREMAN SHOULD WEAR PROTECTIVE CLOTHING AND
SELF CONTAINED RESPIRATORS.
Unusual Fire/Explosion Hazard:DURING A FIRE IRRITATING GASES MAY BE
PRESENT.

Accidental Release

Spill Release Procedures:SCOOP UP BULK MATERIAL AND PLACE IN LABELED
PLASTIC OR METAL CONTAINER. AVOID GROSS SKIN CONTACT TO MINIMIZE
THE POSSIBILITY OF CONTACT DERMATITIS TO SENSITIVE INDIVIDUALS.

Handling

Handling and Storage Precautions:AVOID STORAGE CONDITIONS ABOVE 50C.
Other Precautions:MATERIAL SENSITIVE TO VISIBLE LIGHT, STORE AWAY FROM
FOOD AND BEVERAGES.

Exposure Controls

Respiratory Protection:NONE REQUIRED DURING NORMAL USE OF THIS PRODUCT.
Ventilation:NONE REQUIRED DURING NORMAL INTENDED USE OF THE PRODUCT.
Protective Gloves:LATEX OR VINYL GLOVES
Eye Protection:PROTECTIVE GOGGLES
Other Protective Equipment:NOT REQUIRED FOR GENERAL HANDLING.
Work Hygienic Practices:OBSERVE NORMAL CARE FOR WORKING WITH CHEMICALS.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Spec Gravity:2.2 G/CC
Solubility in Water:INSOLUBLE
Appearance and Odor:CREAMY PASTE, SHADES OFF-WHITE TO YELLOW GREY WITH
ACRYLATE ESTER ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:VISIBLE LIGHT ON PASTE. PROLONGED HEAT
ABOVE 50C.
Hazardous Decomposition Products:POSSIBLE METHACRYLATES.
Conditions to Avoid Polymerization:SENSITIVE TO VISIBLE LIGHT. WILL
HARDEN DURING EXPOSURE.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.