Product ID:P-422 CLEAR
MSDS Date:03/02/1992
FSC:8010
NIIN:00N028961
MSDS Number: BNBNQ

Emergency Phone: 508-865-9516

Info Phone: 508-865-9516

Cage: 1Z273

Telephone: 508-865-9516

Cage: 1Z273

NONHAZARDOUS INGREDIENT

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LOW ORDER OF TOXICITY AND IRRITANCY.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SKIN RASH OR IRRITANCY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN, SEE PHYS. SKIN:
WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. INHAL:
REMOVE TO FRESH AIR. SUPPORT BRTHG. (GIVE O2/ARTF RESP) . INGEST:
CALL M D IMMED .

Flash Point Method:COC
Flash Point:425F,218C
Extinguishing Media:DRY CHEMICAL, FOAM OR WATER SPRAY.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. USE
H2O SPRAY TO COOL FIRE EXPOS SURF, & TO PROTECT PERS. DO NOT USE
JET OF H2O TO BURNING MATL (SUPP DATA)
Unusual Fire/Explosion Hazard:FUMES, CARBON MONOXIDE, AND HCL.

Spill Release Procedures:KEEP PUBLIC AWAY. SHUT OFF SOURCE. CONTAIN
SPILL. PREVENT SPILL FROM ENTERING SEWERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM EXCESSIVE HEAT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USUALLY NOT NEEDED UNLESS FUMES ARE EXCESSIVE.
USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:LOCAL EXHAUST ACCORDING TO GOOD INDUSTRIAL PRACTICE.
MECH(GEN) PROVIDE WORKPLACE VENTILATION.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USUALLY NOT REQUIRED.
Work Hygienic Practices:USE GOOD INDUSTRIAL HOUSEKEEPING. KEEP CLEAN.
Supplemental Safety and Health
FIRE FIGHT PROC: TO AVOID VIOLENT FROTHING.

HCC:N1
Boiling Pt:B.P. Text:446F,230C
Vapor Pres:1.3@200C
Solubility in Water:NOT SOLUBLE
Appearance and Odor:CLEAR LIQUID-MILD ESTER ODOR.

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS, STRONG ACIDS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CO, HCL.
Conditions to Avoid Polymerization:EXCESSIVE HEAT.

Waste Disposal Methods:CONTAIN SPILL. RECOVER SPILL WITH ABSORBENT.
DISPOSE OF ACCORDING TO OSHA FEDERAL, STATE AND LOCAL STANDARDS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.