BNBSG - GV4S2000 SPARK GAPS, COROTON TUBES
- MSDS: BNBSG
- Manufacturer: VICTOREEN INC
- Product Name: GV4S2000 SPARK GAPS, COROTON TUBES
- National Stock Number: 5960-00-960-3177
Product Identification
Product ID:GV4S2000 SPARK GAPS, COROTON TUBES
MSDS Date:10/08/1991
FSC:5960
NIIN:00-960-3177
MSDS Number: BNBSG
Responsible Party
CLEVELAND, OH 44139-3395
US
Emergency Phone: 216-248-9300
Info Phone: 216-248-9300
Cage: 63080
Contractor
Telephone: 216-248-9300
Cage: 63080
Ingredients
NICKEL (SARA III)
CAS: 7440-02-0
RTECS: QR5950000
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:METAL PRODUCTS IN THE NATURAL STATE DO
NOT PRESENT AN INHALATION, INGESTION OR CONATCT HAZARD, HOWEVER,
OPERATIONS SUCH AS BURNING, WELDING, ETC MAY RELEASE FUMES/DUST
WHICH MAY PRESENT HEALTH HAZARDS IF TLV'S ARE EXCEEDED. THE
RADIOSCTIVEMATERIAL IN THE DEVICES REPRESENT NO SIGNIFICANT RISK.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:BECAUSE OF THE AMOUNT OF NICKEL-63 CONTAINED IN
THE DEVICES THIS SECTION IS NOT APPLICABLE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting
Extinguishing Media:USE METHOD APPROPITAE TO SURROUNDING AREA.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NICKEL-63 IN THE SOLID STATE PRESENT NO
FIRE OR EXPLOSION HAZARD.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE
Exposure Controls
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
ALL TUBES CONATIN A EXEMPT QUANTITIES OF ESNI AS DEFINED BY THE USNRC.
Chemical Properties
HCC:A2
Melt/Freeze Pt:M.P/F.P Text:>2300F,>126
Spec Gravity: 7 WATER=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREYISH TO BLACK PLATING ON ANODE(S).
Stability
Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG ACID TO HYDROGEN GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METALLIC DUSTS/FUMES MAY BE PRODUCED
DURING WELDING. BURNING, GRINDING AND POSSIBLY MACHINING. REFER TO
ANSI Z49.1.
Disposal
Waste Disposal Methods:ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.