BNCFM - ACRYLIC LATEX FLAT SUPER WHITE
- MSDS: BNCFM
- Manufacturer: DELAWARE VALLEY PAINT CO
- Product Name: ACRYLIC LATEX FLAT SUPER WHITE
- National Stock Number: 8010-00-598-5733
Product Identification
Product ID:ACRYLIC LATEX FLAT SUPER WHITE
MSDS Date:08/12/1988
FSC:8010
NIIN:00-598-5733
MSDS Number: BNCFM
Responsible Party
PHILADELPHIA, PA 19134
US
Emergency Phone: 215-739-3555 24 HR
Info Phone: 215-739-3555 24 HR
Cage: 0G509
Contractor
Telephone: 215-739-3555 24 HR
Cage: 0G509
Ingredients
NON-HAZARDOUS MATERIAL ACCORDING TO OSHA,HAZARDOUS
Hazards
Health Hazards Acute and Chronic:MAY BE EYE IRRITANT.VAPORS MAY
IRRITATE RESPIRATORY TRACT.MILDLY IRRITATING TO SKIN.
Effects of Overexposure:PROLONGED EXPOSURE MAY CAUSE HEADACHE AND
NAUSEA.
First Aid
First Aid:INHALE-REMOVE TO FRESH AIR.EYES-FLUSH WITH WATER FOR 15
MINUTES.SKIN-WASH WITH SOAP AND WATER.REMOVE CONTAMINATED CLOTHING
AND WASH PRIOR TO REUSE.CALL PHYSICIAN IMMEDIATELY.
Fire Fighting
Flash Point:NONE
Extinguishing Media:ALL MEDIA
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE BOILING
POINT.DRIED POLYMER FILM CAN BURN.
Accidental Release
Spill Release Procedures:HANDLE AS NORMAL SOLID WASTE; SCOOP UP AND
PLACE IN WASTE CONTAINER.KEEP SPILL OUT OF DRAINS,SEWERS AND
WATERWAYS.SPILLED MATERIAL IS SLIPPERY.
Handling
Handling and Storage Precautions:PROTECT FROM FREEZING.STORE COOL AND
DRY AT AMBIENT TEMPREATURE AWAY FROM FOOD AND DRINK.
Other Precautions:AVOID PROLONGED BREATHING AND CONTACT WITH SKIN.
Exposure Controls
Respiratory Protection:NONE IF GOOD VENTILATION IS PROVIDED. MSHA/NIOSH
APPROVED IF NEEDED.
Ventilation:EXHAUST AT POINT OF USE.
Protective Gloves:IMPERVIOUS TO SOLVENTS.
Eye Protection:SPLASHPROOF SAFETY GLASSES.
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Spec Gravity:1.44
Evaporation Rate & Reference:SLOWER(TO N-BUTYL ACETATE
Solubility in Water:COMPLETE (99.9%)
Appearance and Odor:WHITE LIQUID WITH MILD ODOR
Percent Volatiles by Volume:60.78%
Stability
Stability Indicator/Materials to Avoid:YES
NK
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.