BNCGQ - GSA POLISH, METAL (CLEANING & POLISHING, S.

  • MSDS: BNCGQ
  • Manufacturer: HYSAN CORP
  • Product Name: GSA POLISH, METAL (CLEANING & POLISHING, S.
  • National Stock Number: 7930-00-926-5171
Product Identification

Product ID:GSA POLISH, METAL (CLEANING & POLISHING, S.
MSDS Date:09/30/1986
FSC:7930
NIIN:00-926-5171
MSDS Number: BNCGQ

Responsible Party
HYSAN CORP
919 W 38TH ST
CHICAGO, IL 60609-1419
US

Emergency Phone: 312-376-8981

Info Phone: 312-376-8981

Preparer: M FOGOL JR

Cage: 27689

Contractor
HYSAN CORP (BOUGHT BY HYSAN/AMP-NONE IN CHICAGO)
CHICAGO, IL 60609-1419 US

Telephone: NONE

Cage: 27689

Ingredients

METHYL CHLOROFORM (1,1,1-TRICHLOROETHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: >50%

OSHA PEL 350 PPM

ACGIH TLV: 350 PPM/450STEL;9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


CARBON DIOXIDE

CAS: 124-38-9

RTECS: FF6400000

Fraction By Weight: 1-5%

OSHA PEL 5000 PPM

ACGIH TLV: 5000PPM/30000STEL;93

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: EYE IRRITANT. SKIN: MILDLY
IRRITATING UPON PROLONGED CONTACT. INHALATION: A CENTRAL NERVOUS
SYSTEM DEPRESSANT. ANESTHETIC EFFECTS MAY OCCUR IN 1000 PPM RANGE.
MAY INCREASE MYOCARDIAL IRRITABLITY . INGESTION: IF ASPIRATED MAY
BE RAPIDLY ABSORBED THRU LUNGS AND RESULT IN INJURY TO OTHER BODY
SYSTEMS.
Effects of Overexposure:IRRITATION AND ODOR.
Medical Cond Aggravated by Exposure:UNKNOWN.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. CALL PHYSICIAN IF
IRRITATION PERSISTS. SKIN: WASH WITH SOAP & WATER. INHALATION:
REMOVE TO FRESH AIR. INGESTION: DO NOT INDUCE VOMITING. CALL A
PHYSICIAN AT ONCE .

Fire Fighting

Flash Point Method:TCC
Flash Point:NONE ON CONC
Lower Limits:7
Upper Limits:15
Extinguishing Media:WATER FOG.
Fire Fighting Procedures:KEEP CONTAINERS COOL. USE SHIELDING TO PROTECT
PERSONNEL AGAINST BURSTING, RUPTURING, OR VENTING CONTAINERS.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES (OVER 130F)
CONTAINERS MAY VENT, RUPTURE OR BURST.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF FLAME, SPARK, OR HEAT.
PROVIDE ADEQUATE VENTILATION. WIPE UP SPILLS, THEN WASH WITH A
CLEANER. FLOORS MAY BE SLIPPERY; USE CAUTION TO AVOID FALLS.

Handling

Handling and Storage Precautions:CONTENTS UNDER PRESSURE. KEEP OUT OF
REACH OF CHILDREN. DO NOT STORE WHERE TEMPERATURES MAY EXCEED 130
F.
Other Precautions:READ ENTIRE LABEL BEFORE USING.

Exposure Controls

Respiratory Protection:NONE REQUIRED.
Ventilation:LOCAL EXHAUST: HOOD OR FAN. MECHANICAL (GENERAL): MAINTAIN
ADEQUATE VENTILATION.
Protective Gloves:NONE REQUIRED.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE REQUIRED.
Supplemental Safety and Health

Chemical Properties

HCC:V2
Boiling Pt:B.P. Text:165F,74CIBP
Vapor Pres:100
Vapor Density:>1
Spec Gravity:1.32 (WATER=1)
Evaporation Rate & Reference:>1 (BU AC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, THIN LIQUID WITH A MILD CHLOROFORM-LIKE
ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:HEAT.
Hazardous Decomposition Products:HCL, OXIDES OF CARBON AND MINUTE
TRACES OF PHOSGENE & CHLORINE FORMED UPON COMBUSTION.

Disposal

Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE CONTAINERS.
REPLACE CAP AND DISCARD CONTAINERS IN TRASH.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.