Product ID:TT-P-1411A WATERPROOFING H 13935
MSDS Date:12/30/1987
FSC:8010
NIIN:00-985-7029
MSDS Number: BNCHB

WARREN PAINT AND COLOR COMPANY

NASHVILLE, TN 37203-5526
US

Emergency Phone: 615-292-6655

Info Phone: 615-292-6655

Cage: 1J302

WARREN PAINT AND COLOR COMPANY

NASHVILLE, TN 37203-5526 US

Telephone: 615-292-6655

Cage: 1J302

MINERAL SPIRITS (VP 6.2 HG @ 100F TEMP)

CAS: 64742-88-7

Fraction By Weight: 27.77%

OSHA PEL 500 PPM

PORTLAND CEMENT

Fraction By Weight: 26.62%

HIGH FLASH NAPTHA (VP 7.8 HG @ 100 F TEMP)

Fraction By Weight: 1.64%

3.46 LBS/GAL

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:INHALE-DIZZYNESS,BREATHING
DIFFICULTY,HEADACHES,LOSS OF COORDINATION.EYE-SEVERE
IRRITATION,TEARING,REDNESS,BLURRED VISION.SKIN-CAN DRY,DEFAT SKIN
CAUSING CRACKS,IRRITATION,DERMITITS.INGEST-CAN CAUSE G
ASTROINTESTIONAL IRRITATION,VOMITING,NAUSEA, DIARRHEA.
Medical Cond Aggravated by Exposure:ANESTHESIA,RESPIRATORY TRACT
IRRITATION,DERMATITIS,NAUSEA,VOMITING.

First Aid:INHALE-MOVE TO FRESH AIR.IF BREATH STOPS APPLY ARTIFICIAL
RESP,GET IMMED MED ATTN.EYE-FLUSH WITH LARGE AMOUNTS OF WATER FOR
15 MINUTES.SKIN-WASH THOROUGHLY WITH SOAP,WATER,GET MED
ATTN.INGEST-DO NOT I NDUCE VOMITING, CAN CAUSE CHEMICAL PNEUMONITIS
AND PULMONARY EDEMA.CONTACT PHYSICIAN IMMEDIATELY.

Flash Point Method:TCC
Flash Point:103F,39C
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG,
OTHER
Fire Fighting Procedures:RESPIRATORY EQUIPMENT SHOULD BE WORN TO AVOID
INHALATION OF CONCENTRATED VAPORS. WATER SHOULD NOT BE USED EXCEPT
AS FOG TO KEEP NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HANDLE AS COMBUSTIBLE MATERIAL.VAPORS
FORM AN EXPLOSIVE MIXTURE IN AIR BETWEEN THE UPPER AND LOWER
EXPLOSIVE LIMITS WHICH CAN BE IGNITED BY MANY SOURCES SUCH*

Spill Release Procedures:ELIMINATE IGNITION SOURCES,PROVIDE GOOD
VENTILATION,DIKE SPILL AREA AND ADD ABSORBENT EARTH OR SAWDUST TO
SPILLED LIQUD.THOROUGHLY WET W/WATER AND MIX.

Handling and Storage Precautions:USE NON-SPARKING UTENSILS.AVOID HOT
METAL SURFACES.USE IN COOL,WELL-VENT AREAS.KEEP CONTAINERS CLOSED
WHEN NOT IN USE.KEEP FRM HEAT OPEN FLAMES.
Other Precautions:SMOKING IN AREAS WHERE THIS MATERIAL IS USED SHOULD
BE STRICTLY PROHIBITED.

Respiratory Protection:WHEN SPRAYING USE NIOSH APPROVED CARTRIDGE
RESP/GAS MASK SUITABLE TO KEEP AIRBORNE MISTS/VAPOR CONCENTRATIONS
BELOW TIME-WEIGHTED THRESHOLD LIMIT VALUES.IN POOR
VENTILATED/CONFINED AREA USE FRESH-AIR RESPIRATOR/SCBA.
Ventilation:GENERAL MECHANICAL OR LOCAL EXHAUST.VENT EQUIP SHOULD BE
EXPLOSION PROOF.
Protective Gloves:IMPERMEABLE CHEMICAL HANDLING GLOVES.
Eye Protection:CHEM SAFETY GLASSES,GOGGLES,FACESHIELD
Other Protective Equipment:USE IMPERMEABLE APRONS AND PROTECTIVE
CLOTHING.USE HEAD CAPS WHENEVER POSS IS STRONGLY RECOMMENDED.
Work Hygienic Practices:EYE WASHES AND SAFETY SHOWERS IN THE WORKPLACE
IS RECOMMENDED.
Supplemental Safety and Health
*AS PILOT LIGHTS,OPEN FLAMES, ELECTRICAL MOTORS AND SWITCHES.

Boiling Pt:B.P. Text:307 TO 316F
Vapor Density:>AIR
Spec Gravity:11.77
Evaporation Rate & Reference:40.65 (ETHYL ETHER =1)
Appearance and Odor:COLOR-CLEAR
Percent Volatiles by Volume:53.91

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS AND OXIDIZING MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT,POOR VENTILATION,CORROSIVE
ATMOSPHERES,EXCESSIVE AGING.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERES,EXCESSIVE AGING.

Waste Disposal Methods:COLLECT ABSORBENT/WATER/SPILLED LIQUID MIXTURE
INTO METAL CONTAINERS AND ADD ENOUGH WATER TO COVER.CONSULT
LOCAL,STATE,FEDERAL HAZARDOUS WASTE REGULATION BEFORE DISPOSING
INTO APPROVED HAZARDOUS WASTE LANDFILLS.OBEY RELEVANT LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.