Product ID:CONSUMET A286 CF ANL BRIGHT CLN
MSDS Date:01/01/1987
FSC:3439
NIIN:01-150-3250
MSDS Number: BNCKL

CARPENTER TECHNOLOGY CORP

101 W BERN ST
READING, PA 19601
US

Emergency Phone: 215-371-2000

Info Phone: 215-371-2000

Cage: 71321

CARPENTER TECHNOLOGY CORP

14662 READING, PA 19612-4662 US

Telephone: 610-208-2134 / 610-208-2457/2457

Cage: 71321

IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 56.0%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 25.0%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 14.5%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 2.0%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 1.50%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1.0%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

LD50 LC50 Mixture:TLV FOR WELDING FUMES IS 5 MG/M3
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: FUMES AND GASES CAN CAUSE EYES
AND UPPER RESPIRATORY SYSTEM IRRITATION, AND CENTRAL NERVOUS SYSTEM
EFFECTS. ARC RAYS CAN INJURE EYES AND BURN SKIN. ELECTRIC SHOCK CAN
KILL. NOISE CAN DAMAGE HEA RING. CHRONIC: NEUROLOGICAL DAMAGE, LUNG
FIBROSIS, PNEUMOCONIOSIS. NICKEL AND CHROMIUM ARE SUSPECTED
CARCINOGENS.
Explanation of Carcinogenicity:NICKEL AND CHROMIUM ARE LISTED UNDER
IARC AND NTP.
Effects of Overexposure:SHORT TERM EXPOSURE: NAUSEA, FEVER, DIZZINESS,
DRYNESS, IRRITATION OF EYES, NOSE AND THROAT, SKIN SENSITIVITY.
ACUTE EXPOSURE: SAME SYMPTOMS TO HIGHER DEGREE AS WELL AS WATERY
EYES, HEADACHE, BREATHIN G DIFFICULTY, FREQUENT COUGHING, CHEST
PAINS.
Medical Cond Aggravated by Exposure:AGGRAVATION OF EXISTING RESPIRATORY
OR ALLERGIC CONDITIONS.HIGHER LEVEL OF LUNG RELATED PROBLEMS AMONG
SMOKERS.

First Aid:INHALATION: REMOVE FROM EXPOSURE. IF BREATHING IS DIFFICULT,
GIVE OXYGEN. IF NOT BREATHING, GIVE CPR. IF NO DETECTABLE PULSE,
GIVE HEART MASSAGE. EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 1 5 MINUTES. SKIN: WASH WITH SOAP AND WATER. INGESTION: SEEK
MEDICAL ATTENTION.

Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE
AND PLACE IN APPROPIATE DISPOSAL CONTAINER. AVOID INHALATION AND
SKIN EXPOSURE.

Handling and Storage Precautions:STORE IN DRY AREA. ELECTRODES EXPOSED
TO MOISTURE MAY EXPLODE VIOLENTLY IF USED. DRY MOIST RODS BY BAKING
AT 300F FOR TEN HOURS.
Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
MONITOR AIR TO ENSURE ACCEPTABLE EXPOSURES. AVOID ELECTRICAL SHOCK
BY MAINTAINING DRY WORK AREA.

Respiratory Protection:FUME RESPIRATOR OR AIR SUPPLIED RESPIRATOR IN
CONFINED SPACES OR WHERE VENTILATION DOES NOT KEEP EXPOSURE BELOW
TLV.
Ventilation:LOCAL EXHAUST TO KEEP BELOW TLV.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:HELMET OR FACE SHIELD WITH FILTER LENS.
Other Protective Equipment:SUBSTANTIAL DARK CLOTH, ARM PROTECTOR,
APRON, HAT AND SHOULDER PROTECTION. AIR SAMPLING TO DETERMINE
CORRECTIVE MEASURES
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING, SMOKING OR
USING SANITARY FACILITIES.
Supplemental Safety and Health
NONE.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:2400F,1316C
Spec Gravity:8
Solubility in Water:INSOLUBLE.
Appearance and Odor:WELDING ROD.
Percent Volatiles by Volume:NONE

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:FUMES OF METALS AND METAL OXIDES FROM
ELECTRODE AND BASE METAL, CARBON MONOXIDE, CARBON DIOXIDE, OZONE,
NITROGEN OXIDES.

Waste Disposal Methods:CONSULT WITH YOUR LOCAL ENVIRONMENTAL OFFICER.
DISPOSE OF FUMES, FLUX OR WELD GRINDING RESIDUE FROM THE WORK AREA
OR FROM FILTERS IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.