Product ID:M-COAT Q HEAT CURING POLYIMIDE COATING
MSDS Date:12/17/1986
FSC:8030
NIIN:00N034821
MSDS Number: BPWMH

MEASUREMENTS GROUP INC

RALEIGH, NC 27611
US

Emergency Phone: 919-365-3800

Info Phone: 919-365-3800

Cage: 88952

MEASUREMENTS GROUP INC

WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

ACETAMIDE, N,N-DIMETHYL-; (N,N-DIEMTHYLACETAMIDE). LD50

CAS: 127-19-5

RTECS: AB7700000

Fraction By Weight: 40%

OSHA PEL 10 PPM, S

ACGIH TLV: 10 PPM, S

(ORAL, RAT) 9750 MG/KG.

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 40%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

POLYMER (AMIDE-IMIDE)

Fraction By Weight: 20%

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC EXPOSURE MAY INCLUDE KIDNEY
AND/OR LIVER DAMAGE. ACUTE EXPOSURE MAY INDUCE EYE TEARING AND
BLURRED VISION, DIZZINESS, NAUSEA, NARCOSIS, TISSUE DEFATTING,
DERMATITIS, AND GASTRIC DISTRESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EYES: IRRITATION, REDNESS, TEARING, BLURRED
VISION. INHAL: IRRITATION OT MUCOUS TISSUE, HEADACHE, NAUSEA,
DIZZINESS. CONTACT: IRRITATION AND MILD DERMATITIS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH W/COPIOUS AMTS OF WATER FOR @ LST 15 MIN. INHAL:
REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF BRTHG IS
DFCLT, ADMIN O*2. INGEST: IF CONSCIOUS, IMMEDIATELY INDUCE
VOMITING. GIVE WA TER TO DILUTE. SKIN: WASH AFFECTED AREAWITH SOAP
AND WATER. FLUSH AREA THOROUGHLY. LAUNDER CONTAMINATED CLOTHING
BEFORE REUSE. IF AN IRRITATION PERSISTS, SEEK MEDICAL AID. IN ALL
CASES, SEEK MED AID.

Flash Point Method:TCC
Flash Point:0F,-18C
Lower Limits:2.8%
Upper Limits:13.2%
Extinguishing Media:CARBON DIOXIDE, ALCOHOL FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . USE WATER TO COOL FIRE-EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:VAPORS MAY FLOW ALONG SURFACES TO DISTANT
IGNITION SOURCES AND FLASH BACK. CLOSED CONTAINERS EXPOSED TO HEAT
MAY EXPLODE.

Spill Release Procedures:REMOVE SOURCES OF IGNITION, VENTILATE AREA.
WIPE UP WITH ABSORBENT MATERIAL SUCH AS SAND OR VERMICULITE. FLUSH
AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE BELOW 80F (27C) IN DRY
WELL-VENTILATED FLAMMABLE LIQUID AREA. KEEP CONTAINERS TIGHTLY
SEALED.
Other Precautions:AVOID PROLONGED EXPOSURE TO VAPORS OR SKIN CONTACT.
DO NOT INGEST.

Respiratory Protection:FOR EMERGENCY USE TO 5000 PPM: NIOSH/MSHA
APPROVED ORG VAP CANISTER. OTHER: FOR EMERGENCY USE > 5000 PPM:
NIOSH/MSHA APPROVED SCBA.
Ventilation:USE LOCAL OR GENERAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS.
Protective Gloves:BUTYL OR NEOPRENE RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERVIOUS OVER-CLOTHING. SAFETY SHOWER AND
EYE WASH STATION IN LOCAL AREA.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:F3
Boiling Pt:B.P. Text:133F,56C
Vapor Pres:226 @ 77F
Vapor Density:3
Spec Gravity:0.8 (H*2O=1)
Evaporation Rate & Reference:8 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK BROWN LIQUID; ACETONE ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AND HALOGENATED COMPOUNDS.
Stability Condition to Avoid:HEAT, SOURCES OF IGNITION.
Hazardous Decomposition Products:OXIDES OF CARBON, NITROGEN, AMMONIA,
AND PARTIALLY BURNED AMINES.

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.