BRBCM - TRU-FLEX TRC 22 READY-TO-USE RED
- MSDS: BRBCM
- Manufacturer: TOURAINE PAINTS INC
- Product Name: TRU-FLEX TRC 22 READY-TO-USE RED
- National Stock Number: 8010-00F027791
Product Identification
Product ID:TRU-FLEX TRC 22 READY-TO-USE RED
MSDS Date:06/01/1987
FSC:8010
NIIN:00F027791
MSDS Number: BRBCM
Responsible Party
EVERETT, MA 02149
US
Emergency Phone: 617-387-4590
Info Phone: 617-387-4590
Preparer: PAUL BERENS
Cage: 71978
Contractor
Telephone: 617-387-4590
Cage: 71978
Ingredients
TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
CAS: 14807-96-6
RTECS: WW2710000
OSHA PEL 20 MPPCF
ACGIH TLV: 2 MG/CUM (RESP DUST)
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. INHALATION:
RESPIRATORY TRACT IRRITATION, HEADACHES & NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN:
REMOVE W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION:
DRINK PLENTY OF WATER. DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION I N ALL CASES.
Fire Fighting
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:NO FIRE HAZARD.
Unusual Fire/Explosion Hazard:PRODUCT WILL NOT BURN. CLOSED CONTAINERS
MAY BOIL OR SPATTER & EXPLODE WHEN EXPOSED TO EXTREME HEAT. DRY
COATING FILMS ARE CAPABLE OF BURNING.
Accidental Release
Spill Release Procedures:KEEP UNNECESSARY PEOPLE AWAY. DIKE/CONTAIN
SPILL W/INERT MATERIAL (SAND/EARTH/ETC) & TRANSFER LIQUID TO
CONTAINERS FOR RECOVERY OR DISPOSAL. KEEP SPILLS OUT OF SEWERS/OPEN
BODIES OF WATER. SPILLED PAI NT IS VERY SLIPPERY. USE CAUTION TO
AVOID FALLS.
Handling
Handling and Storage Precautions:DON'T STORE >140F OR <32F. KEEP FROM
FREEZING. KEEP AWAY FROM CHILDREN. READ LABEL ON PAINT CAN BEFORE
USING.
Other Precautions:AVOID CONTACT W/SKIN.
Exposure Controls
Respiratory Protection:NONE REQUIRED IN AREAS OF GOOD VENTILATION. WEAR
MESA/NIOSH APPROVED VAPOR/MIST RESPIRATOR IN AREAS OF POOR
VENTILATION & DURING SPRAY APPLICATION.
Ventilation:MAINTAIN GOOD VENTILATION DURING THE APPLICATION/DRYING OF
PAINT FILM. MECHANICAL LOCAL EXHAUST: IF POOR VENTILATION.
Protective Gloves:RUBBER
Eye Protection:SPLASH PROOF SAFETY GLASSES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Pres:17
Vapor Density:>1
Spec Gravity:1.33
Evaporation Rate & Reference:(BU AC = 1): 0.36
Solubility in Water:DILUTABLE
Appearance and Odor:RED LIQUID W/SLIGHT AMMONIA ODOR.
Percent Volatiles by Volume:47.3%
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXTREME HEAT (TEMPS >140F), FREEZING
(TEMPS <32F)
Disposal
Waste Disposal Methods:DISPOSE OF PAINT IN ACCORDANCE TO LOCAL, STATE,
& FEDERAL REGULATIONS & AUTHORITIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.