Product ID:MADIC METHYL ANHYDRIDE NMA
MSDS Date:07/29/1988
FSC:6550
NIIN:00F027863
MSDS Number: BRBFR

Emergency Phone: 215-343-6484

Info Phone: 215-343-6484

Cage: 9C365

Telephone: 215-313-6484

Cage: 9C365

NADIC METHYL ANHYDRIDE

CAS: 25134-21-8

RTECS: RB9100000

Fraction By Weight: >99%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: SENSITIZER, IRRITATION,
CORROSIVE. EYES: VERY IRRITATING. INHALATION: VERY IRRITATING TO
RESPIRATORY TRACT.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:ASTHMA, CHRONIC PULMONARY
CONDITIONS.

First Aid:SKIN: WASH AFFECTED AREA W/COPIOUS AMOUNTS OF WATER. EYES:
FLUSH W/WATER FOR AT LEAST 15 MINS. INHALATION: REMOVE TO FRESH
AIR. GIVE OXYGEN OR ARTIFICIAL RESPIRATION, AS NEEDED. INGESTION:
IF THE VICT IM IS CONSCIOUS GIVE WATER OR MILK TO DILUTE THE
INGESTED MATERIAL. DON'T INDUCE VOMITING. DON'T ATTEMPT CHEMICAL
NEUTRALIZATION. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:COC
Flash Point:275F
Extinguishing Media:WATER, CO2, DRY CHEMICAL POWDER, FOAM
Fire Fighting Procedures:FIREFIGHTERS MUST WEAR SELF-CONTAINED
BREATHING APPARATUS & FULL PROTECTIVE EQUIPMENT.

Spill Release Procedures:ABSORB SPILL ON AN INERT MATERIAL. SCOOP UP,
HOLD IN A CLOSED CONTAINER FOR DISPOSAL. WASH & VENTILATE SPILL
SITE AREA AFTER CLEANUP IS COMPLETED. WEAR A RESPIRATOR, GOGGLES,
RUBBER GLOVES & BOOTS.

Handling and Storage Precautions:STORE AT TEMPERATURES BETWEEN 65-104F;
KEEP STORAGE CONTAINER TIGHTLY CLOSED. THAW FROZEN MATERIAL <140F &
MIX THOROUGHLY BEFORE USE.
Other Precautions:AVOID PROLONGED OR FREQUENT EXPOSURE.

Respiratory Protection:OSHA/MHSA APPROVED RESPIRATOR.
Ventilation:FUME HOOD
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:SAFETY SHOWER/EYEWASH STATIONS.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Boiling Pt:B.P. Text:280F
Vapor Pres:5
Vapor Density:6.1
Spec Gravity:1.3
Appearance and Odor:PALE TAN LIQUID, ODORLESS.

Stability Indicator/Materials to Avoid:YES
WATER, ACIDS, BASES, OXIDIZING AGENTS.
Stability Condition to Avoid:MOISTURE
Hazardous Decomposition Products:CO, CO2
Conditions to Avoid Polymerization:TEMPS AT 200C

Waste Disposal Methods:MIX WASTE W/A COMBUSTIBLE CARRIER & BURN IN A
SUITABLE EQUIPPED CHEMICAL INCINERATOR. DISPOSE OF IN ACCORDANCE
W/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.