BRBLQ - 3426 FRANKLIN SPACKLEBOND

  • MSDS: BRBLQ
  • Manufacturer: FRANKLIN INTL INC
  • Product Name: 3426 FRANKLIN SPACKLEBOND
  • National Stock Number: 8030-00F028071
Product Identification

Product ID:3426 FRANKLIN SPACKLEBOND
MSDS Date:11/01/1990
FSC:8030
NIIN:00F028071
MSDS Number: BRBLQ

Responsible Party
FRANKLIN INTL INC
2020 BRUCK ST
COLUMBUS, OH 43207-2329
US

Emergency Phone: 614-443-0241AM/614-445-1411PM

Info Phone: 614-443-0241

Cage: FO903

Contractor
FRANKLIN INTL INC
COLUMBUS, OH 43207-2329 US

Telephone: 800-347-4583/614-443-0241

Cage: FO903

Ingredients

CHLOROMETHYLPROPYL MERCURIC ACETATE

CAS: 1319-86-4

RTECS: OV5945000

Fraction By Weight: 0.009%

OSHA PEL 0.01 MG/CUM

ACGIH TLV: 0.03 MG/CUM


AMMONIA, AMMONIUM HYDROXIDE-ANHYDROUS, ANHYDROUS AMMONIA

CAS: 7664-41-7

RTECS: BO0875000

Fraction By Weight: 1.7%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM/35 STEL; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION. SKIN: RASH.
Medical Cond Aggravated by Exposure:ALLERGENIC

First Aid

First Aid:INGESTION: DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH
AIR. EYES: RINSE W/RUNNING WATER FOR AT LEAST 15 MINS. SKIN: WAASH
W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:NONE
Extinguishing Media:WATER, DRY CHEMICAL, CO2 OR FOAM
Fire Fighting Procedures:WEAR MESA/NIOSH APPROVED SELF-CONTAINED
BREATHING APPARATUS (SCHEDULE 13).
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:IF PRODUCT HAS DRIED, SCRAPE UP & PLACE IN
APPROVED CONTAINER FOR DISPOSAL.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WHERE EXPOSURE
LIMITS ARE EXCEEDED. USE DUST MASK IF PRODUCT IS TO BE SANDED.
Ventilation:LOCAL EXHAUST WHERE PRODUCT IS DRIED. STANDARD PLANT
VENTILATION.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES W/SIDE SHEILDS
Other Protective Equipment:SAFETY GOGGLES
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:210F
Vapor Density:>1
Spec Gravity:0.60
pH:10.2
Evaporation Rate & Reference:(ETHER = 1 ): <1
Solubility in Water:INSOLUBLE UNTIL DRY
Appearance and Odor:SOFT PASTE, MILD ODOR
Percent Volatiles by Volume:27.5

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING TEMPERATURES
Hazardous Decomposition Products:CO, CO2 & TOXIC MONOMER WHEN BURNED.

Disposal

Waste Disposal Methods:DISPOSE PRODUCT & CONTAINERS IN ACCORDANCE
W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.