BRBQX - 7550 ZAP B38
- MSDS: BRBQX
- Manufacturer: ATCO MFG CO
- Product Name: 7550 ZAP B38
- National Stock Number: 6850-00F028200
Product Identification
Product ID:7550 ZAP B38
MSDS Date:03/31/1992
FSC:6850
NIIN:00F028200
MSDS Number: BRBQX
Responsible Party
MARIETTA, GA 30060-2926
US
Emergency Phone: 404-424-7550
Info Phone: 404-424-7550
Cage: 3Y342
Contractor
Telephone: 404-424-7550
Cage: 3Y342
Ingredients
2-BUTOXYETHANOL (ETHYLENEGLYCOL MONOBUTYL ETHER), BUTYL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 2%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
AMMONIUM HYDROXIDE, AQUA AMMONIA
CAS: 1336-21-6
RTECS: BQ9625000
Fraction By Weight: 57.6%
ACGIH TLV: 25 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: STINGING. INHALATION: BREATHING
DIFFICULITIES, HEADACHES, NAUSEA & DIZZINESS.
Explanation of Carcinogenicity:NONE
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN/EYES: FLUSH W/WATER.
INGESTION: SEE PHYSICIAN IMMEDIATELY. OBTAIN MEDICAL ATTENTION IN
ALL CASES.
Fire Fighting
Flash Point Method:TOC
Flash Point:0-150F
Extinguishing Media:WATER
Accidental Release
Spill Release Procedures:FLUSH W/LARGE VOLUME OF WATER.
Handling
Handling and Storage Precautions:DON'T STORE WHERE TEMPERATURE EXCEEDS
120F. SEE LABEL.
Exposure Controls
Respiratory Protection:NONE REQUIED AS LONG AS NOT USED IN SMALL CLOSED
AREA.
Ventilation:LOCAL EXHAUST-GEN. VENTILATION IS ADEQUATE.
Protective Gloves:NONE UNLESS PROLONGED CONTACT
Eye Protection:GOGGLES
Work Hygienic Practices:STANDARD INDUSTRIAL PRACTICES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:50
Melt/Freeze Pt:M.P/F.P Text:92
Vapor Pres:60
Spec Gravity:1.034
Evaporation Rate & Reference:1
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR ORANGE LIQUID AMMONIA ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT OR TEMPS. >120F
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBONS
Conditions to Avoid Polymerization:EXCESSIVE HEAT
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.