Product ID:THORTEX FLOOR-TECH RS BASE
MSDS Date:08/29/1991
FSC:8010
NIIN:00N044953
Kit Part:Y
MSDS Number: BSCLP

Emergency Phone: 0609 780170

Info Phone: 0609 780170

Cage: IO111

Telephone: 0609 780170

Cage: IO111

BISPHENOL A/EPICHLOROHYDRIN EPOXY RESIN

CAS: 25068-38-6

RTECS: SL6475000

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGESTION: CALL MD IMMEDIATELY . INHALATION: REMOVE TO FRESH
AIR. SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . SKIN:
WASH WITH SOAP AND WATER. EYES: FLUSH WITH COPIOUS QUANTITI ES OF
CLEAN WATER FOR AT LEAST 15 MINUTES.

Flash Point:>302F,>150C
Extinguishing Media:FOAM, WATER MIST, CARBON DIOXIDE, DRY POWDER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FLAMMABLE IN CONTACT WITH NAKED FLAME.
HAZARDOUS COMBUSTION PRODUCTS:OXIDES OF CARBON.

Spill Release Procedures:ABSORB WITH SAND, EARTH OR SAWDUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN SEALED CONTAINERS AWAY FROM
SOURCES OF IGNITION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:ENSURE GOOD VENTILATION IN CONFINED AREAS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Boiling Pt:B.P. Text:>482F,>250C
Spec Gravity:1.10
Solubility in Water:INSOLUBLE
Appearance and Odor:PALE STRAW COLORED WITH FAINT ODOR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS . INCINERATE OR DISPOSE OF IN AN
APPROVED INDUSTRIAL WASTE SITE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.