BSCMF - FIBERGLAS RESTORER AND WAX, MODEL 413

  • MSDS: BSCMF
  • Manufacturer: RULE INDUSTRIES INC
  • Product Name: FIBERGLAS RESTORER AND WAX, MODEL 413
  • National Stock Number: 7930-00N044969
Product Identification

Product ID:FIBERGLAS RESTORER AND WAX, MODEL 413
MSDS Date:02/26/1988
FSC:7930
NIIN:00N044969
MSDS Number: BSCMF

Responsible Party
RULE INDUSTRIES INC
CAPE ANN INDUSTRIAL PARK
GLOUCESTER, MA 01930
US

Emergency Phone: 617-281-0440

Info Phone: 617-281-0440

Cage: 50068

Contractor
RULE INDUSTRIES INC
GLOUCESTER, MA 01930 US

Telephone: 617-281-0440

Cage: 50068

Ingredients

SILICONE RESIN

Fraction By Weight: 5%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


WAX

Fraction By Weight: 4%

OSHA PEL N/K

ACGIH TLV: N/K


MORPHOLINE

CAS: 110-91-8

RTECS: QD6475000

Fraction By Weight: 1%

OSHA PEL 20 PPM;30 STEL, S

ACGIH TLV: 20 PPM, S


DIATOMACEOUS EARTH, NATURAL

CAS: 61790-53-2

RTECS: HL8600000

Fraction By Weight: 11%

OSHA PEL N/K

ACGIH TLV: 10 MG/M3 (DUST)


0.7%

CAS: 8002-05-9

RTECS: SE7449000

Fraction By Weight: 27%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DIZZINESS, RESPIRATORY TRACT
IRRITATION. CHRONIC: NARCOSIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN. INHAL: REMOVE TO
FRESH AIR. IF DIFFICULTY CONTINUES SEE PHYSICIAN. SKIN: FLUSH WITH
COPIOUS AMOUNTS OF WATER. CALL MD . INGEST: GET MD IMMEDIATELY (FP
N).

Fire Fighting

Flash Point:101F,38C
Lower Limits:0.7%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:KEEP AWAY FROM FIRE, HEAT, FLAMES.

Accidental Release

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED CARTRIDGE RESPIRATOR IF
VAPOR CONCENTRATION IS ABOVE TLV. (TLV=200 PPM)
Ventilation:USE OUT DOORS OR PROVIDE VENTILATION TO KEEP BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:>100F,>38C
Vapor Density:HVR/AIR
Spec Gravity:0.97
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:50

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NOT KNOWN.

Disposal

Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.