Product ID:AW MACHINE OIL 320, CPS232926
MSDS Date:08/24/1989
FSC:9150
NIIN:00N045517
MSDS Number: BSCRX

CHEVRON

RICHMOND, CA 94804
US

Emergency Phone: 800-457-2022; 510-233-3737

Info Phone: 800-582-3835

Cage: 0AHD1

CHEVRON ENVIRONMENTAL HEALTH CENTER INC

4054 RICHMOND, CA 94804 US

Telephone: 800-582-3835

Cage: 0AHD1

MINERAL OIL

CAS: 72623-83-7

OSHA PEL N/K

ACGIH TLV: N/K

ADDITIVES

Fraction By Weight: 1%

OSHA PEL N/K

ACGIH TLV: N/K

LUBRICATING BASE OIL (MAY BE A MIXTURE OF ANY OF INGS 2-12)

RTECS: 9999999ZZ

Fraction By Weight: 99%

OSHA PEL 5 MG/M3 OIL MIST

ACGIH TLV: 5 MG/M3 OIL MIST

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED

CAS: 64741-88-4

RTECS: PY8040501

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED

CAS: 64741-89-5

RTECS: PY8041501

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED

CAS: 64741-96-4

RTECS: PY8040001

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED

CAS: 64741-97-5

RTECS: PY8041001

OSHA PEL N/K

ACGIH TLV: N/K

RESIDUAL OILS (PETROLEUM), SOLVENT-REFINED

CAS: 64742-01-4

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)

CAS: 64742-52-5

RTECS: PY8035001

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)

CAS: 64742-53-6

RTECS: PY8036001

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)

CAS: 64742-54-7

RTECS: PY8035501

OSHA PEL N/K

ACGIH TLV: N/K

SOLVENT, DEWAXED RESIDUAL OIL (PETROLEUM)

CAS: 64742-62-7

OSHA PEL N/K

ACGIH TLV: N/K

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY

CAS: 64742-65-0

RTECS: PY8038501

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THE HAZARD EVALUATION IS BASED ON DATA
FROM SIMILAR MATERIALS. EYES & SKIN:NOT EXPECTED TO CAUSE
PROLONGED/SIGNIFICANT IRRITATION. THE SYSTEMIC TOXICITY OF PRODUCT
HAS NOT BEEN DETERMINED. HOWEVER, IT SHOULD BE PRACTICALLY
NON-TOXIC TO INTERNAL ORGANS IF IT GETS ON THE SKIN, IF INHALED OR
IF SWALLOWED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE OXYGEN/ARTF
RESP). EYES:FLUSH EYES W/FRESH WATER FOR @ LEAST 15 MIN. REMOVE
CONTACT LENSES IF WORN. SKIN:WASH SKIN THORO W/SOAP & WATER. REMOVE
& W ASH CONTAMD CLTHG. INGEST:GIVE WATER/MILK TO DRINK & CALL FOR
MED ADVICE. CONSULT MED PERS BEFORE INDUCING VOMIT. IF MED ADVICE
CANNOT BE OBTAINED, TAKE PERSON & PROD CNTNR TO NEAREST MED
(SUPDAT)

Flash Point Method:COC
Flash Point:500F,260C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:INCOMPLETE COMBUSTION CAN PRODUCE CARBON
MONOXIDE.

Spill Release Procedures:MATL NOT EXPECTED TO PRESENT ANY ENVIRON
PROBLEM OTHER THAN THOSE ASSOC W/OIL SPILLS. STOP SOURCE OF
LEAK/RELS. CLEAN UP RELS AS SOON AS POSS. CONTAIN LIQ TO PVNT
FURTHER CONTAM OF SOIL, SURF WATER/GR OUNDWATER. CLEAN UP SM SPILL
USING APPROP (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT WELD, HEAT OR DRILL CONTAINER.
RESIDUE MAY IGNITE WITH EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY.
Other Precautions:CAUTION! DO NOT USE PRESSURE TO EMPTY DRUM OR
EXPLOSION MAY RESULT. THIS PRODUCT CONTAINS PETROLEUM BASE OILS
WHICH MAY BE REFINED BY VARIOUS PROCESSES INCLUDING SEVERE SOLVENT
EXTRACTION, SEVERE HYDR OCRACKING OR SEVERE HYDROTREATING.

Respiratory Protection:NO SPECIAL RESPIRATORY PROTECTION IS NORMALLY
REQUIRED. HOWEVER, IF OPERATING CONDITIONS CREATE HIGH AIRBORNE
CONCENTRATIONS, THE USE OF A NIOSH/MSHA APPROVED RESPIRATOR IS
RECOMMENDED.
Ventilation:USE ADEQUATE VENTILATION TO KEEP THE AIRBORNE
CONCENTRATIONS OF THIS MATERIAL BELOW THE RECOMMENDED EXPOSURE
STANDARD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:SKIN CONTACT CAN BE MINIMIZED BY WEARING
PROTECTIVE CLOTHING.
Work Hygienic Practices:AVOID PROLONGED OR FREQUENTLY REPEATED SKIN
CONTACT WITH THIS MATERIAL.
Supplemental Safety and Health
FIRST AID PROC:EMER TREATMENT CENTER/ HOSPITAL. SPILL PROC:TECHNIQUES
SUCH AS SORBENT MATLS/PUMPING. WHERE FEASIBLE & APPROP, REMOVE
CONTAMD SOIL. FOLLOW PRESCRIBED PROC FOR REPORTING & RESPONDING TO
LARGER RELEASES.

HCC:V6
Spec Gravity:0.90 @ 15.6C
Solubility in Water:INSOLUBLE
Appearance and Odor:PALE YELLOW LIQUID.

Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,
PEROXIDES, ETC.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NO DATA AVAILABLE.

Waste Disposal Methods:PLACE CONTAMD MATLS IN DISPOSABLE CONTAINERS &
DISPOSE OF IN A MANNER CONSISTENT WITH FEDERAL, STATE & LOCAL
REGULATIONS. CONTACT LOCAL ENVIRONMENTAL OR HEALTH AUTHORITIES FOR
APPROVED DISPOSAL OF THI S MATERIAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.