Product ID:EA 934 NA PART A, PROD CODE:AA9174 (RESIN)
MSDS Date:05/01/1992
FSC:8040
NIIN:00-810-5414
Kit Part:Y
MSDS Number: BSCXB

DEXTER HYSOL AEROSPACE INC DIV OF EXTER CORP

2850 WILLOW PASS ROAD
PITTSBURG, CA 94565-3237
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 510-458-8000

Cage: 33564

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

EPOXY POLYMER (PROPRIETARY)

Fraction By Weight: 40-70%

4-GLYCIDYLOXY-N,N-DIGLYCIDYLANILINE

CAS: 5026-74-4

Fraction By Weight: 15-40% %

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 10-30% %

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9293

SILICA

CAS: 112926-00-8

Fraction By Weight: 1-5% %

LD50 LC50 Mixture:MIXTURE HAS NOT BEEN TESTED AS A WHOLE.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN RASH, IRRIT. BRIEF CONTACT MAY
IRRIT SKIN/CAUSE RASH. REPEATED/PROLONGED SKIN CONTACT MAY RESULT
IN ALLERGIC SENSITIZATION.
Explanation of Carcinogenicity:PER MSDS:MEITHER MATL NOR ANY OF ITS
COMPONENTS IS CONSIDERED A HUMAN CARCINOGEN.
Effects of Overexposure:SKIN RASH, IRRIT. ALLERGIC SENSITIZATION.
Medical Cond Aggravated by Exposure:SKIN SENSITIZATION.

First Aid:EYE:FLUSH W/WATER FOR 15MINS. IRRIT PERSISTS GET MED ATTN.
SKIN:WASH THOROUGHLY W/SOAP/WATER. IRRIT PERSISTS GET MED ATTN.
INHAL:REMOVE VICTIM TO FRESH AIR. SYMPTOMS PERSIST GET MED ATTN.
INGEST:DRINK PLENTY OF WATER. GET MED ATTN IMMED.

Flash Point:NOT TESTED
Lower Limits:NOT TESTED
Upper Limits:NOT TESTED
Extinguishing Media:DRY CHEMICAL, OR HALON FIRE EXTINGUISHER, OR WATER
SPRAY, FOAM OR FOG. (NOTE:HALON IS A ODS.)
Fire Fighting Procedures:WEAR 800-424-9300(CHEMTREC) & FULL PROT CLOTH
SUCH AS TURN-OUT GEAR.CARTRIDGE RESP DO NOT PROVIDE ADEQUATE PROT
FRO FIRE FIGHTERS OR EXOTHERM MITIGATION.
Unusual Fire/Explosion Hazard:MAY LIBERATE LARGE QUANTITIES OF DENSE
FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIFIED TOXIC GASSES.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING,GLOVES,SAFETY
GLASSES.SCRAPE UP OR SHOVEL INTO DOT APPROVED WASTE CONTAINERS.

Handling and Storage Precautions:REFRIGERATED STORAGE RECOMMENDED TO
MAINTAIN PROD QUALITY.PROD MAY BE STORED @40F FOR UP TO
12MONS.FOLLOW CURING SCHEDULE RECOMMEDNED IN PROD LITERATU
Other Precautions:DO NOT CUT/GRIND/WELD/DRILL ON/NEAR THIS CNTNR.
VISCOSITY:5000-9000 BROOKFIELD, SPDL.7.

Respiratory Protection:UNNECESSARY WITH ADEQUATE EXHAUST VENTILATION.
Ventilation:LOCAL EXHAUST VENTILATION AT THE POINT OF USE.
Protective Gloves:BUTYL RUBBER, PVC, NITRILE RUBBER GLOVES
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS,CHEM GOGG.
Other Protective Equipment:EYEWASH & SAFETY SHOWER SHOULD BE NEARBY &
READY FOR USE.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
CNDNS TO AVOID:UNLESS CURING SURFACES TO BE BONDED.FAILURE TO OBSERVE
PRECAUT MAY RESULT IN EXCESS HEAT BUILDUP CAUSING
EXOTHERM--POTENTIAL FOR RELEASE OF TOXIC GASES. DISPOSAL:MAY BE
DIFFI THAN RED L AW/REGS.CONSULT STATE/LOC REGS REGARDING PROPER
DISPOSAL. FORMULATION CHANGE FOR PART A. 2-PART KIT.

HCC:V7
Vapor Pres:NIL
Vapor Density:>A, AIR=1
Spec Gravity:1.59
Viscosity:5000-9000P
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PASTE, VISCOUS GRAY PASTE WITH SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:AVOID MIXING RESIN(PTA)& CURING
AGENT(PTB)IN BATCHES >1LB UNLESS PLAN TO USE IMMED.DO NOT HEAT MX
ADHESIVE >125F (SUPPL)
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS &
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:POLYMERIZATION MAY OCCUR. NONE
SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:MATL AS WASTE NOT CONSIDERED RCRA HAZ
WASTE.HOWEVER INCINERATION IN EPA APPROVED WASTE INCINERATOR
PREFERRED DISPOSAL PRACTICE.CHEM ADDN/PROCESS/ALTERING MATL MAY
MAKE WASATE MANAGEMENT INFO HEREIN IN
COMPLETE/INACCURATE/INAPPROPR.ADDN STATE/LOC (SUP)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.