Product ID:ANNAPOLIS ADHESIVE RESIN
MSDS Date:01/02/1993
FSC:8040
NIIN:01-312-8537
Kit Part:Y
MSDS Number: BSDBM

ITW PHILADELPHIA RESINS

130 COMMERCE DR
MONTGOMERYVILLE, PA 18936
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 215-855-8450

Cage: ITWPH

ITW PHILADELPHIA RESINS

454 MONTGOMERYVILLE, PA 18936 US

Telephone: 508-777-1100

Cage: ITWPH

BISPHENOL A DIGLYCIDYL ETHER RESIN

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: >60%

OSHA PEL N/K

ACGIH TLV: N/K

0 LBS/GAL

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:LD50 (ORAL, RAT): 2,000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES:IRRITANT. SKIN:IRRITANT.
INHALATION:BECAUSE OF ITS VERY LOW VOLATILITY, THIS PRODUCT IS NOT
LIKELY TO PRODUCE ANY ADVERSE EFFECTS BY INHALATION.
INGESTION:GENERALLY CONSIDERED TO HAVE A LO W ORDER OF ACUTE ORAL
TOXICITY. CHRONIC: REPEATED EXCESSIVE OVEREXPOSURE MAY RESULT IN
SKIN SENSITIZATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN AND EYE ALLERGIES
MAY INCREASE THE CHANCE OF DEVELOPING INCREASED ALLERGY SYMPTOMS
FROM EXPOSURE.

First Aid:EYES: FLUSH W/CLEAN WATER FOR AT LEAST 15 MINUTES WHILE
GENTLY HOLDING EYELIDS OPEN. GET IMMED MED ATTN. SKIN: IMMEDIATELY
REMOVE CONTAMINATED CLOTHING & WASH W/PLENTY OF SOAP & WATER. GET
MED ATTN IF SYMPTOMS PERSIST. INHALATION: REMOVE TO FRESH AIR.
ADMINISTER OXYGEN IF BREATHING IS DIFFICULT. GET MED ATTN.
INGESTION: DO NOT INDUCE VOMITING. GIVE MILK/WATER TO DILUTE. IMMED
CONSULT MD.

Flash Point Method:PMCC
Flash Point:225F,107C
Extinguishing Media:CARBON MONOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:AVOID PERSONAL CONTACT. SCRAPE UP AS MUCH
MATERIAL AS POSSIBLE AND PLACE IN A SUITABLE, LABELED CONTAINER FOR
WASTE DISPOSAL. RESIDUE MAY BE REMOVED USING A SAFETY SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY PLACE W/ADEQ VENT.
KEEP AWAY FROM OPEN FLAME & HIGH TEMP. PRACTICE GOOD HOUSEKEEPING
PROC TO AVOID ALL SKIN CNTCT & BRTHG OF VAPS.
Other Precautions:AVOID PROLONGED INHALATION OF HEATED VAP/SPRAY MIST.
AVOID RPTD/PRLNG SKIN CNTCT. IF THIS PROD IS SANDED/MACHINED AFTER
CURING, TAKE APPROP PREC AGAINST INHALATION OF NUISANCE
PARTICULATES. A TLV-TWA OF 10 MG/M3 SHOULD BE OBSERVED.

Respiratory Protection:NOT ORDINARILY REQUIRED FOR RESIN. DUST MASKS
SHOULD BE WORN DURING ANY GRINDING OR MACHINING PROCEDURES ON CURED
RESINS. NIOSH/MSHA APPROVED RESPIRATORS MAY BE REQUIRED IN CONFINED
AREAS.
Ventilation:GENERAL MECHANICAL VENTILATION IS USUALLY ADEQUATE FOR MOST
INDUSTRIAL APPLICATIONS.
Protective Gloves:CHEMICAL RESISTANT RUBBER GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:CLEAN LONG-SLEEVE AND LONG LEG CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING & BEFORE
SMOKING, EATING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:F6
Boiling Pt:B.P. Text:530F,277C
Spec Gravity:1.29
Evaporation Rate & Reference:NON-VOLATILE (BUAC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE WITH NO ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
ALDEHYDES AND ACIDS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.