Product ID:A-30 CARTRIDGE TONER BLACK
MSDS Date:11/01/1995
FSC:6850
NIIN:01-371-1596
MSDS Number: BSDCS

Emergency Phone: 516-488-6700/800-424-9300(CHEMTREC)

Info Phone: 516-488-6700

Cage: 08YZ7

Telephone: 800-370-8663 603-431-3624

Cage: 0YL79

STYRENE ACRYL COPOLYMER

Fraction By Weight: 55-60%

IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 30-40%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER IS NOT ACCESSIBLE, UNLESS THE
CARTRIDGE IS FORCED OPEN OR BROKEN INTO. ACUTE: EYES: MATERIAL MAY
BE IRRITATING. SKIN: LOW HAZARD FOR INDUSTRIAL HANDLING.
INHALATION: TONER POWDER MAY CAUSE RESPI RATORY IRRITATION.
INGESTION: NOT A LIKELY SOURCE OF EXPOSURE. CHRONIC: NONE
SPECIFIED.
Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS ABOVE 0.1%
WHICH ARE IDENTIFIED AS CARCINOGENS BY NTP,IARC OR OSHA.
Effects of Overexposure:EYES: IRRITATION. SKIN: LOW HAZARD FOR
INDUSTRIAL HANDLING. INHALATION: IRRITATION, COUGHING. INGESTION:
NOT A LIKELY SOURCE OF EXPOSURE.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING
RESPIRATORY AILMENTS MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. IF IRRITATION
PERSISTS, GET MEDICAL ATTENTION. SKIN: WASH AREA WITH SOAP AND
WATER. INHALATION: MOVE TO FRESH AIR. INGESTION: DRINK SEVERAL
GLASSES OF WATER. G ET MEDICAL ATTENTION.

Extinguishing Media:NON-FLAMMABLE SOLID-ACCORDING TO TEST METHOD IN 16
CFR 1500.44. USE WATER, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:USE A SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:THIS MATERIAL, LIKE MOST ORGANIC
MATERIALS IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.

Spill Release Procedures:SWEEP MATERIAL ONTO PAPER AND PLACE IN FIBER
CARTON. DO NOT CREATE DUST.
Neutralizing Agent:NONE

Handling and Storage Precautions:MINIMIZE DUST GENERATION AND
ACCUMULATION. USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF
CHILDREN.
Other Precautions:KEEP FROM CONTACT WITH OXIDIZING MATERIALS.

Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR IWTH DUST CARTRIDGE IF RECOMMENDED AIRBORNE
CONCENTRATIONS EXCEEDED.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:NONE NORMALLY REQUIRED.
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. USE APPROPRIATE CARE IN HANDLING.
Supplemental Safety and Health
NOTE:25SEP97. MSDS CURRENT TO HMIS. VENDOR ADDED. NO OTHER CHANGES
MADE.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:212F,100C
Spec Gravity:1.4-1.6
Evaporation Rate & Reference:NEGLIGIBLE (BU AC = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID FINE BLACK POWDER. A SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS:
AVOID CREATING DUSTY CONDITIONS.
Hazardous Decomposition Products:DECOMPOSITION WILL PRODUCE CARBON
MONOXIDE AND CARBON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. NO SPECIAL DISPOSAL TECHNIQUE REQUIRED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.