Product ID:4340
MSDS Date:01/06/1987
FSC:3439
NIIN:01-118-2743
MSDS Number: BSDSJ

UNITED STATES WELDING CORPORATION

20700 DEARBORN STREET
CHATSWORTH, CA 91311
US

Emergency Phone: 818-341-2021

Info Phone: 818-341-2021

Preparer: JORGE JACOBS

Cage: 9M563

UNITED STATES WELDING CORPORATION

CHATSWORTH, CA 91311 US

Telephone: 818-341-2021

Cage: 9M563

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 20-30%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9293

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 0.8%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

MOLYBDENUM (INSOLUBLE COMPOUNDS)

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0.3%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

CARBON (GRAPHITE, SYNTHETIC)

CAS: 7440-44-0

RTECS: FF5250100

Fraction By Weight: 0.4%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

NON HAZARDOUS INGREDIENTS

Fraction By Weight: BALANCE

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF WELDING FUMES MAY
CAUSE NERVOUS SYSTEM AND MUSCLE IRREGULARITIES, IRRITATION OF EYES,
NOSE, THROAT, AND RESPIRATORY SYSTEM, METAL FUME FEVER. CHRONIC:
INHALATION OF FUMES MAY CAUS E CANCER, NEUROLOGICAL DAMAGE,
PNEUMOCONIOSIS, AND OTHER LUNG DISEASES.
Explanation of Carcinogenicity:CONTAINS NICKEL AND CHROMIUM WHICH ARE
LISTED BY NTP AND IACR.
Effects of Overexposure:INHALATION: NAUSEA, DIZZINESS, DRYNESS OF NOSE
AND THROAT, COUGHING, WHEEZING AND SHORTNESS OF BREATH. EYES:
REDNESS, TEARING, BLURRED VISION.
Medical Cond Aggravated by Exposure:PERSONS WITH IMPAIRED LUNG
FUNCTION, AIRWAY DISEASES AND CONDITIONS, SUCH AS ASTHMA,
EMPHYSEMA, CHRONIC BRONCHITIS.

First Aid:INHALATION: REMOVE TO FRESH AIR. RESUSCITATE IF NEEDED. EYES:
FLUSH WITH PLENTY OF WATER FOR 15 MINUTES, HOLD LIDS OPEN. SEE
DOCTOR. SKIN: IF IRRITATION DEVELOPS, WASH WITH SOAP AND WATER.
INGESTION: DO NOT INDUCE VOMITING. SEE DOCTOR.

Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:MOLTEN METAL ALLOYS MAY EXPLODE ON
CONTACT WITH WATER. THEY MAY ALSO REACT VIOLENTLY WITH WATER, RUST
AND CETAIN METAL OXIDES.

Spill Release Procedures:PICK UP RODS. SWEEP UP OR MOP. PLACE RESIDUE
IN A CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:REMOVE ANY COMBUSTIBLES FROM WORK
AREA: SPARKS OR WELDING ARC COULD IGNITE NEARBY COMBUSTIBLES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR WELDING
FUMES OR SUPPLIED AIR RESPIRATOR IN CONFINED SPACES OR WHERE FUME
CONCENTRATION EXCEEDS REGULATORY LIMITS. USE IN ACCORDANCE WITH 29
CFR 1910.134.
Ventilation:USE MECHANICAL OR LOCAL EXHAUST OR BOTH TO MAINTAIN LEVELS
OF FUMES BELOW REGULATORY LIMITS.
Protective Gloves:WELDERS WORK GLOVES
Eye Protection:WELDERS HELMET WITH CORRECT LENSES
Other Protective Equipment:CLOTHING TO PROTECT ENTIRE BODY FROM SPARKS.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS FILLER MATERIAL. DLSC TIR: 36 INCHES LONG
BY 0.125.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METAL FUMES

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.