BWMBB - ACCUBRADE-50, BLEND 3

  • MSDS: BWMBB
  • Manufacturer: S S WHITE TECHNOLOGIES
  • Product Name: ACCUBRADE-50, BLEND 3
  • National Stock Number: 6810-00N057018
Product Identification

Product ID:ACCUBRADE-50, BLEND 3
MSDS Date:12/01/1992
FSC:6810
NIIN:00N057018
MSDS Number: BWMBB

Responsible Party
S S WHITE TECHNOLOGIES
151 OLD NEW BRUNSWICK RD
PISCATAWAY, NJ 08854
US

Emergency Phone: 908-752-8300

Info Phone: 908-752-8300

Preparer: M. ZWARYCZ

Cage: IO968

Contractor
S S WHITE TECHNOLOGIES
PISCATAWAY, NJ 08854 US

Telephone: 908-752-8300

Cage: IO968

Ingredients

3); (ALPHA-ALUMINA) (AL*2O*3) (SARA 313)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: >99%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


IMPURITIES

Fraction By Weight: <1%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:MAY CAUSE COUGHING,
SHORTNESS OF BREATH. NO KNOWN ADVERSE AFFECTS, BUT INGESTION IS NOT
RECOMMENDED. SKIN:MODERATE IRRITATION. NOT ABSORBED THROUGH SKIN;
MAY CAUSE ABRASIONS. EYE:DUST MAY IRRITATE EYES. MODERATE
IRRITATION. CHRONIC:MAY AFFECT BREATHING CAPACITY.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:GET MEDICAL ATTENTION. SKIN:FLUSH W/SOAP & WATER.
EYE:FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
ATTENTION. INHAL:REMOVE TO FRESH AIR. GET MEDICAL ATTENTION.

Fire Fighting

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:SWEEP OR SCOOP UP & REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE.
Other Precautions:NOT ESTABLISHED.

Exposure Controls

Respiratory Protection:USE ONLY NIOSH/MSHA APPROVED FILTER RESPIRATOR -
DUST, FUME, MIST.
Ventilation:ALWAYS MAINTAIN EXPOSURE BELOW PELS. LOCAL EXHAUST. USE
W/ADEQUATE VENTILATION. SEE OSHA 29 CFR 1910.94 & 1910.1000.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:NOT ESTABLISHED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:3452F,1900C
Spec Gravity:3.95 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:GRANULAR WHITE; NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NOT ESTABLISHED.
Stability Condition to Avoid:NOT ESTABLISHED.
Hazardous Decomposition Products:NOT ESTABLISHED.

Disposal

Waste Disposal Methods:STANDARD LANDFILL METHODS CONSISTENT
W/APPLICABLE FEDERAL, STATE & LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.