BXBBM - 3,3'-DIMETHYLNAPHTHIDINE FOR COMPLEXOMETRY, 40850

  • MSDS: BXBBM
  • Manufacturer: ALDRICH CHEMICAL CO INC
  • Product Name: 3,3'-DIMETHYLNAPHTHIDINE FOR COMPLEXOMETRY, 40850
  • National Stock Number: 6810-00N057752
Product Identification

Product ID:3,3'-DIMETHYLNAPHTHIDINE FOR COMPLEXOMETRY, 40850
MSDS Date:04/01/1994
FSC:6810
NIIN:00N057752
MSDS Number: BXBBM

Responsible Party
ALDRICH CHEMICAL CO INC
1001 W ST PAUL AVE
MILWAUKEE, WI 53201
US

Emergency Phone: 800-231-8327

Info Phone: 414-273-3850

Cage: 60828

Contractor
ALDRICH CHEMICAL CO INC
355 MILWAUKEE, WI 53201 US

Telephone: 800-231-8327;414-273-3850

Cage: 60828

Ingredients

3,3'-DIMETHYLNAPHTHIDINE FOR COMLEXOMETRY

CAS: 13138-48-2

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE HARMFUL BY INHALATION,
INGESTION OR SKIN ABSORPTION. CAUSES EYE & SKIN IRRITATION.
MATERIAL IS IRRITATING TO MUCOUS MEMBRANES & UPPER RESPIRATORY
TRACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: IMMED FLUSH EYES W/COPIOUS AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. SKIN: IMMEDIATELY WASH W/SOAP & COPIOUS AMOUNTS
OF WATER. INHAL: REMOVE TO FRESH AIR. IF NOT BREATHING GIVE ARTF
RESP. IF BRE ATHING IS DIFFICULT, GIVE OXYGEN. INGEST: WASH OUT
MOUTH WITH WATER PROVIDED PERSON IS CONSCIOUS. CALL MD.

Fire Fighting

Extinguishing Media:WATER SPRAY. CARBON DIOXIDE, DRY CHEMICAL POWDER OR
APPROPRIATE FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

Accidental Release

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY PLACE. KEEP
TIGHTLY CLOSED.
Other Precautions:DO NOT BREATHE DUST. AVOID CONTACT WITH EYES, SKIN &
CLOTHING.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:COMPATIBLE CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES.
Other Protective Equipment:SAFETY SHOWER & EYE BATH MEETING ANSI DESIGN
CRITERIA.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Appearance and Odor:YELLOW POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF: CARBON MONOXIDE,
CARBON DIOXIDE, NITROGEN OXIDES.

Disposal

Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED W/AFTER BURNER
& SCRUBBER. OBSERVE ALL FEDERAL, STATE & LOCAL ENVIRONMENTAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.