Product ID:RTV BLACK ADHESIVE SEALANT, 81173
MSDS Date:10/02/1986
FSC:8030
NIIN:00N058173
MSDS Number: BXBGH

PERMATEX INDUSTRIAL

705 NORTH MOUNTAIN ROAD
NEWINGTON, CT 06111-1411
US

Emergency Phone: 203-278-1280

Info Phone: 203-278-1280

Preparer: STEPHAN REPETTO

Cage: 62377

PERMATEX INDUSTRIAL

HARTFORD, CT 06106 US

Telephone: 877-376-2839

Cage: 62377

POLYDIMETHYL SILOXANE; (POLY (DIMATHYLSILOXANE))

CAS: 9016-00-6

RTECS: TQ2690000

Fraction By Weight: 80-85%

OSHA PEL N/K

ACGIH TLV: N/K

POLYACETOXY SILANE

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K

SILICA, CRYSTALLINE-QUARTZ; (SILICON DIOXIDE)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K

PIGMENT

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE AND SKIN IRRI. MODERATE TOXICITY
BY INGEST. INHAL OF PURE SILICON DIOXIDE DUST HAS BEEN SHOWN TO
CAUSE ADVERSE PULM EFTS. IT IS OUR BEST TECHNICAL JUDGEMENT THAT,
W/PROPER PREC, NORM USE OF THIS P ROD POSES NO SUCH HAZ. THESE
STATEMENTSARE PRESENT ONLY TO COMPLY W/OSHA REGS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:ACETIC ACID LIBERATED DURING CURE IRRITATES
EYES, NOSE AND THROAT, PROLONGED OR REPEATED CONTACT MAY IRRITATE
SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMITING. KEEP INDIVIDUAL CALM. OBTAIN
MEDICAL ATTENTION. INHAL: REMOVE TO FRESH AIR. TREAT
SYMPTOMATICALLY. SKIN: WIPE FROM SKIN WITH DRY CLOTH. WASH WITH
SOAP AND WATER. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
OBTAIN MEDICAL ATTENTION.

Flash Point Method:CC
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS PRODUCTS FORMED BY FIRE OR
THERMAL DECOMPOSITION: ACETIC ACID, FORMALDEHYDE, SILICA MIST.

Spill Release Procedures:WIPE OR SCRAPE UP MATERIAL. MAINTAIN GOOD
VENTILATION FOR LARGE SPILLS. ALLOW MATERIAL TO CURE TO RUBBER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN DRY AREA BELOW 90F. KEEP
CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:AVOID EYE OR SKIN CONTACT. ACETIC ACID VAPOR RELEASED
DURING APPLICATION AND CURE. DO NOT WEAR CONTACT LENSES WHILE
APPLYING MATERIAL. VAPOR MAY BE TRAPPED UNDER LENS. DO NOT PUNCTURE
CONTAINERS.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:PROVIDE ADEQUATE VENTILATION FOR PROLONGED USE IN CONFINED
AREA.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5
Spec Gravity:1.05 @ 60F
Solubility in Water:POLYMERIZED
Appearance and Odor:BLACK PASTE WITH ACETIC ACID ODOR

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AIR OR MOISTURE CAUSES POLYMERIZATION
AND ACETIC ACID VAPORS RELEASED.

Waste Disposal Methods:LANDFILL OR INCINERATE FOLLOWING EPA AND LOCAL
REGULATIONS. MATERIAL NOT CONSIDERED A HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.