BXBXM - WATER MASTER WATERBORNE, SANDING SEALER, LF#KB25-127
- MSDS: BXBXM
- Manufacturer: ALTERNATIVE MATERIALS TECHNOLOGY INC
- Product Name: WATER MASTER WATERBORNE, SANDING SEALER, LF#KB25-127
- National Stock Number: 8010-01-397-3757
Product Identification
Product ID:WATER MASTER WATERBORNE, SANDING SEALER, LF#KB25-127
MSDS Date:04/18/1994
FSC:8010
NIIN:01-397-3757
MSDS Number: BXBXM
Responsible Party
CHICO, CA 95928
US
Emergency Phone: 916-894-3585
Info Phone: 916-894-3585
Cage: 0ZXD0
Contractor
Telephone: 916-894-3585
Cage: 0ZXD0
Ingredients
PROPYLENE GLYCOL MONOBUTYL ETHER
CAS: 5131-66-8
RTECS: UA7700000
Fraction By Weight: 6.0%
169.0 GRAMS/LITER MINUS
RTECS: 9999999VO
0.526 POUNDS/GALLON. 63
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE: SEVERE IRRITATION (DIRECT
CONTACT). SKIN: IRRITATION (REPEATED/PROLONGED CONTACT).
INHALATION: (EXTREMELY HIGH CONCENTRATIONS) EYES & RESPIRATORY
TRACT IRRITATION. SIGNS & SYMPTOMS OF TOXICITY AR E SIMILAR TO
THOSE OF SWALLOWING. SWALLOWING: HEADACHE, DIZZINESS,
INCOORDINATION, NAUSEA, VOMITING, DIARRHEA, GENERAL *
Effects of Overexposure:* WEAKNESS. INGESTION OF SIGNIFICANT QUANTITIES
MAY RESULT IN RED BLOOD CELL HEMOLYSIS. CONSULT PHYSICIAN AT ONCE.
Medical Cond Aggravated by Exposure:MAY AGGRAVATE AN EXISTING
DERMATITIS.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH EYES THOROUGHLY WITH WATER AND
CONTINUE WASHING FOR SEVERAL MINUTES. OBTAIN MEDICAL ATTENTION.
SKIN: REMOVE CONTAMINATED CLOTHING. FLUSH SKIN WITH WATER.
INHALATION: REMOVE TO FRESH AIR. SWALLOWING: IF PATIENT IS
CONSCIOUS AND HAS A GAG REFLEX, GIVE TWO GLASSES OF WATER. INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:CC
Flash Point:NONCOMBUSTIBLE
Extinguishing Media:TYPE A, B, C, OR COMBINATION TYPE
Accidental Release
Spill Release Procedures:DIKE AND CONTAIN SPILLS. ABSORB WITH SUITABLE
MATERIAL. COLLECT MATERIAL INTO SUITABLE CONTAINERS AND DISPOSE OF
PROPERLY.
Handling
Handling and Storage Precautions:DO NOT ALLOW PRODUCT TO FREEZE!
Exposure Controls
Respiratory Protection:IF ADEQUATE VENTILATION IS NOT MAINTAINED,
RESPIRATORS (OSHA/NIOSH APPROVED) MAY BE NECESSARY. IF EXPOSURE TO
SPRAY MISTS EXIST, WEAR NIOSH APPROVED ORGANIC VAPOR/PARTICULATE
RESPIRATOR.
Ventilation:LOCAL EXHAUST VENTILATION IS RECOMMENDED.
Protective Gloves:IMPERVIOUS, CHEMICAL RESISTANT GLOVES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Density:< 1
Spec Gravity:1.016 (H20=1)
Evaporation Rate & Reference:LESS THAN 1 (BU AC=1)
Solubility in Water:DILUTABLE
Appearance and Odor:MILK WHITE, SLIGHT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
COUNTY, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.