Product ID:MOLECULAR SIEVE TYPE 13X
MSDS Date:03/01/1992
FSC:6850
NIIN:01-030-4827
MSDS Number: BXCBP

UOP INC

25 E ALGONQUIN RD
DES PLAINES, IL 60017-5017
US

Emergency Phone: 708-391-2123/800-424-9300(CHEMTREC)

Info Phone: 708-391-2123

Cage: 02QC3

UOP LLC

DES PLAINES, IL 60017-5017 US

Telephone: 847-391-2953

Cage: 02QC3

SODIUM OXIDE

CAS: 1313-59-3

Fraction By Weight: <20%

ALUMINUM OXIDE (NON-FIBROUS) (SARA III)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: <40%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

SILICON OXIDE

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <60%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

MAGNESIUM OXIDE

CAS: 1309-48-4

RTECS: OM3850000

Fraction By Weight: <5%

OSHA PEL 10 MG/M3 PARTICULATE

ACGIH TLV: 10 MG/M3, FUME; 9394

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:GETS HOT AS ADSORBS
WATER.PROLONG CONTACT RESULTS IN BURNS TO MOIST BODY
TISSUES.INHAL:MAY CAUSE NOSE/THROAT IRRIT ACCOMPANIED BY
COUGH/CHEST DISCOMFORT.SKIN:MAY CAUSE IRRIT,BURN.EYE:MAY CAUSE
DISCOMFORT &/OR IRRIT,REDNESS OF CONJUNCTIVA.CHRONIC:PROLONGED
INHAL MAY CAUSE LUNG DAMAGE.
Explanation of Carcinogenicity:PER MSDS:CARCINOGENIC
ASSESSMENT:NTP/IARC/OTHERS:NONE CURRENTLY KNOWN.
Effects of Overexposure:INGEST:BURNS. SKIN:REDNESS, BURNS.
INHAL:NOSE/THROAT IRRIT, COUGH, CHEST DISCOMFORT. EYE:DISCOMFORT,
IRRIT, EXCESS REDNESS OF CONJUCTIVA.
Medical Cond Aggravated by Exposure:BREATHING OF DUST MAY AGGRAVATE
ASTHMA & INFLAMMATORY OR FIBROTIC PULMONARY DISEASE.

First Aid:INGEST:IF IN LG QUANTITIES DRINK 2 GLASSES OF WATER. CONTACT
DR FOR PERMISSION TO INDUCE VOMIT.SKIN:WASH
W/SOAP/WATER.INHAL:REMOVE TO FRESH AIR.EYE:FLUSH W/WATER FOR
15MINS.NOTE TO DR:PROD IS A DESICC ANT & GENERATES HEAT AS IT
ADSORBS WATER.USED PRODUCT CAN CONTAIN MATL OF HAZ NATURE.IDENTIFY
THAT MATL & TREAT SYMPTOMATICALLY.

Flash Point:DOES NOT BURN
Extinguishing Media:UNUSED MATL WILL NOT BURN. USE MEDIA APPROPRIATE
FOR SURROUNDING FIRE.
Fire Fighting Procedures:DEPENDS ON USE OF MATL.USED MATL MAY CONTAIN
PROD OF HAZ NATURE.USER OF THIS PRODUCT MUST IDENTIFY HAZ OF
RETAINED MATL & INFORM FIRE FIGHTERS OF THESE HAZ.
Unusual Fire/Explosion Hazard:IN FRESH UNUSED STATE MOLEULAR SIEVES NOT
FLAMM.WHEN EXPO TO WATER CAN GET QUITE HOT.WHEN 1ST WETTED CAN HEAT
TO BP OF WATER.FLOODING WILL REDUCE TEMP SAFE LIMI

Spill Release Procedures:SWEEP SPILL AREA. COLLECT & PLACE SPILLED MATL
IN WASTE DISPOSAL CONTAINER. AVOID RAISING DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID BREATH DUST/EYE/SKIN CNTCT.MATL
HAS EXT LOW ORDER OF TOX BY INGEST.PROCESS DESIGNERS/EQPMT
FABRICATORS READ M-1001 FROM UOP RESPRESENTATIVES.
Other Precautions:BEFORE HANDLING/USING READ/UNDERSTAND CURRENT MSDS
FOR MATL & WHEN APPROPRIATE ALSO READ SAFETY BOOKLET M-1001.OPEN
CNTNR SLOWLY.USE W/ADEQUATE VENTILATION.DO NOT PUT IN MOUTH OR POUR
LIQ INTO PRODUCT .BURNS CAN RESULT.

Respiratory Protection:NIOSH/MSHA APPROVED RESP FOR PROTECTION AGAINST
DUST/MIST/VAPOR IS RECOMMENDED FOR OPERATIONS WHEN PERMISSIBLE
EXPOSURE LIMIT MIGHT BE EXCEEDED.
Ventilation:LOCAL EXHA:RECOMMENDED FOR OPERATIONS WHERE PEL MIGHT BE
EXCEEDED.
Protective Gloves:USE GLOVES TO AVOID PROLONG SKIN CONTACT
Eye Protection:SAF GLASS,GOGG PER OSHA 29CFR1910.133.
Other Protective Equipment:SELECT IN ACCORDANCE W/OSHA 1910.132 &
1910.133.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
SPEC GRAV:1.1(PIECE),2.1(CRYSTAL). PH:AQU SLURRY 8-11. HAZ DECOMP
PROD:MOLECULAR SIEVE ITSELF DOESN'T READILY DEOCMPO UNLESS SUBJ TO
EXT TEMP/CHEM CONDITIONS THEN IT WOULD INCLUDE MIX OF OXIDES IN ING
REDS.

HCC:V7
Spec Gravity:SUPPLEMENTAL
pH:SUPPLE
Appearance and Odor:TAN PELLETS, TRISIV GRANULES (IE MESH),BEADS OR
WHITE POWDER OR CAKE, ODORLESS.

Stability Indicator/Materials to Avoid:YES
SUDDEN CONTACT W/HIGH CONC OF CHEMICALS HAVING HIGH HEATS OF ADSORPTION
SUCH AS OLEFINS, HCL, ETC.
Stability Condition to Avoid:ADDITION OF MOISTURE(WATER)W/O FLOODING
CAN CAUSE RISE IN TEMP FRM HEAT OF ADSOPTION-CONTACT W/SKIN MIGHT
RESULT IN BURN
Hazardous Decomposition Products:HYDROCARBONS,OTHER MATL THAT CONTACT
SIEVE DURING NORMAL USE CAN BE RETAINED.HA DECOMP PROD FROM
RETAINED MATL.(SEE SUP)

Waste Disposal Methods:DISCARD ANY PROD(INCLUDING RETAINED MATLS OF
USE),DISPOSABLE CNTNR/LINER IN ENVIRONMENTALLY ACCEPTABLE MANNER,IN
FULL COMPLIANCE W/FED/STATE/LOC REGS.RCRA HAZ WASTE NO:NOT FED REG.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.