Product ID:WHITE STAR, HEAVY WEIGHT BODY FILLER, 202, 204 & 205
MSDS Date:03/22/1993
FSC:1440
NIIN:LWW004865
MSDS Number: BXCRP

FIBRE GLASS-EVERCOAT CO.,INC.

6600 CORNELL ROAD
CINCINNATI, OH 45242-2033
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 800-543-4530

Cage: 18731

FIBRE GLASS-EVERCOAT CO INC

CINCINNATI, OH 45242 US

Telephone: 513-489-7600

Cage: 18731

TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 55-60%

OSHA PEL 2 MG/M3 (MFR)

ACGIH TLV: 2 MG/M3 (MFR)

4.50 MM HG

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 15-20%

OSHA PEL 50 PPM (MFR)

ACGIH TLV: 50 PPM (MFR)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CONT W/LIQ/VAP MAY RSLT
IN IRRIT, REDNESS, TEARING, & BLURRED VISION. SKIN: CONT W/WET MATL
MAY RSLT IN IRRIT, DERM, & POSS DEFAT OF SKIN. INHAL: EXCESSIVE
INHAL OF VAPS MAY CAUSE NASAL & RESP IRRIT, ACUTE NERVS SYS
DEPRESS, FATIGUE, WEAK, NAUS, HDCH, & DIZZ. INGEST: INGEST OF THIS
MATL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE: IARC MONOGRAPHS, SUPPLEMENT,
VOL 7, PG 345, 1987: GROUP 2B ANIMAL: NERVOUS SYSTEM.
Effects of Overexposure:HLTH HAZ: MAY CAUSE GI IRRIT, NAUS, DIARR, &
VOMIT. ASPIR OF MATL INTO LUNGS DUE TO VOMIT MAY PRODUCE CHEM
PNEUMONITIS WHICH CAN BE FATAL. CHRONIC: EXCESSIVE OVEREXPOSURE TO
STYRENE HAS BEEN FOUND TO CAUSE THE FOLLOWING EFFECTS IN LAB
ANIMALS: LIVER ABNORMALITIES, KIDNEY DAMAGE & LUNG DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH IMMED W/LGE AMTS OF WATER FOR AT LEAST 15 MIN.
SEE MD FOR TREATMENT. SKIN: IMMED WASH AFFECTED AREA W/SOAP &
WATER. REMOVE CONTAM CLTHG. CONSULT MD IF IRRIT DEVELOPS. INHAL:
REMOVE PERS TO FRESH AIR. RESTORE BRTHG. KEEP PERS WARM & QUIET.
TREAT SYMPTOMATICALLY. GET MD ATTN. INGEST: DRINK ONE/TWO GLASSES
OF WATER TO DILUTE. KEEP PERS WARM & QUIET. CONSULT MD/POISON CTL
CENTER IMMED.

Flash Point:88.0F,31.1C
Lower Limits:1.1%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER MAY BE USED TO COOL CONTAINERS TO
PREVENT PRESS BUILD-UP WHICH MAY RUPTURE CONTAINERS.
Unusual Fire/Explosion Hazard:VAPS HVR/AIR & MAY TRAVEL ALONG FLOOR &
BE IGNITED BY SPARKS/FLAMES AT DISTANCE FROM WHERE MATL IS BEING
USED. POLYM OF MATL MAY OCCUR UNDER FIRE (SUP DAT)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE THE
AREA. WEAR PROTECTIVE EQUIPMENT. AVOID BREATHING VAPORS. CONTAIN
SPILL. ABSORB WITH DRY INERT MATERIAL, REMOVE AND DISPOSE OF
PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE MATL IN COOL, WELL-VENT AREA. DO
NOT STORE AT TEMPS >75F. DO NOT USE/STORE NEAR HEAT, SPARKS/OPEN
FLAME. KEEP CONTRS TIGHTLY CLOSED.
Other Precautions:MATL MUST BE CATALYZED PRIOR TO USE. WET MATL WILL
HAVE HAZ PROPERTIES OF BOTH COMPONENTS. PLEASE REFER TO MSDS FOR
CATALYST. IF PROD IS TO BE SANDED, PEL/TLV OF 10 MG/M3 FOR NUISANCE
DUSTS SHOULD BE OBSERVED. KEEP OUT OF REACH OF (SUP DAT)

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS DESIGNED TO
REMOVE PARTICULATES MATTER AND ORGANIC SOLVENT VAPORS.
Ventilation:GEN DILUTION/LOC EXHAUST VENT SHOULD BE PROVIDED TO KEEP
EXPOS < ACCEPTABLE LIM & TO KEEP SOLV VAPS Protective Gloves:NEOPRENE OR NATURAL RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:IMPERMEABLE CLOTHING SHOULD BE WORN TO
PREVENT PROLONGED OR REPEATED CONTACT OF WET MATERIAL WITH THE
SKIN.
Work Hygienic Practices:ALWAYS WASH HANDS AFTER USING THIS MATERIAL,
AND BEFORE EATING, DRINKING, OR SMOKING.
Supplemental Safety and Health
EXPLO HAZ: CNDTNS. POLYM OF MATL IN CLOSED CONTR CAN CREATE PRESS
BUILD-UP WHICH MAY RUPTURE CONTR. OTHER PREC: CHILDREN. DO NOT TAKE
INTERNALLY. AVOID CONT W/EYES & SKIN.

Boiling Pt:B.P. Text:293F,145C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.72
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
PEROXIDES, STRONG OXIDIZERS, STRONG MINERAL ACIDS, STRONG BASES AND
POLYMERIZATION CATALYSTS.
Stability Condition to Avoid:HIGH TEMPERATURES, IGNITION SOURCES AND
CONTACT WITH INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:HAZ FUMES MAY BE PRODUCED WHEN MATL IS
HEATED TO DECOMP. FUMES MAY CONTAIN CO, CO*2, AND VARIOUS
HYDROCARBONS.
Conditions to Avoid Polymerization:HIGH TEMPERATURES, IGNITION SOURCES
AND CONTACT WITH INCOMPATIBLE MATERIALS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. BEFORE ATTEMPTING CLEAN-UP OR DISPOSING OF
MATERIAL, REFER TO HAZARD INFORMATION IN OTHER SECTIONS OF THIS
MSDS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.