Product ID:ARNOX 4
MSDS Date:05/28/1992
FSC:9650
NIIN:00N058722
MSDS Number: BXDLQ

ARNOLD ENGINEERING CO

300 N WEST ST
MARENGO, IL 60152
US

Emergency Phone: 815-568-2000

Info Phone: 815-568-2000

Preparer: ROBERT LIPPE

Cage: 95566

ARNOLD ENGINEERING CO DIV OF SPS TECHNOLOGIES

G MARENGO, IL 60152 US

Telephone: 815-568-2000

Cage: 95566

STRONTIUM OXIDE

CAS: 1314-11-0

OSHA PEL N/K

ACGIH TLV: N/K

IRON(III)OXIDE; (IRON OXIDE)

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5MG(FE)/M3FUME,B2

ALUMINUM (SARA 313)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15 MG/M3 DUST

ACGIH TLV: 10 MG/M3 DUST

SILICON

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

BARIUM (SARA 313)

CAS: 7440-39-3

RTECS: CQ8370000

OSHA PEL 0.5 MG/M3

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ANY LONG-TERM EXPOSURE TO DUSTS
EXCEEDING TLV MAY RESULT IN IRRITATION TO UPPER RESPIRATORY TRACT.
DUSTS IN EYES MAY CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN: FLUSH
W/COPIOUS AMOUNTS OF WATER. CALL MD. INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING(GIVE O*2/ARTF RESP). INGEST: CALL MD IMMEDIATELY
.

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:PROD IS NOT COMBUST. FINE POWDERS PRDCED
BY DRY ABRASIVE GRINDING/MACHINING MAY CAUSE AN EXPLOS HAZ. CONTROL
DUST LEVELS BY UTILIZING WET PROCESS (SUPP DATA)

Spill Release Procedures:DUST OR FINE SCRAP MAY BE VACUUMED OR SWEPT
WET TO KEEP AIRBORNE DUST CONCENTRATIONS TO A MINIMUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:PARTS THAT ARE MAGNETIZED MAY CREATE A PERSONAL
HAZARD DUE TO CHIPPING, SHATTERING OR PINCHING ON IMPACT. WEAR
GLOVES WHEN HNDLG PARTS WHERE SHARP EDGES/POSS OF BREAKING/CRACKING
IS GREAT.

Respiratory Protection:USE NIOSH/MSHA APPROVED DUSTS MASK WHEN DRY
GRINDING/CUTTING MATERIALS. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA. USE PERS PROT EQUIP WHEN REQUIRED.
Work Hygienic Practices:USE GOOD MFG PRACS & GOOD HOUSEKEEPING PRACS
THAT WILL KEEP GENERATED DUSTS TO MINIMUM. USE GOOD PERSONAL
HYGIENE PRACS.
Supplemental Safety and Health
EXPLO HAZ: METHODS, GOOD LOCAL EXHAUST SYSTEM & GOOD HOUSEKEEPING.

Spec Gravity:4.5-4.9
Solubility in Water:NOT SOLUBLE.
Appearance and Odor:METALLIC DARK GRAY; NO ODOR.

Stability Indicator/Materials to Avoid:YES
PRODUCT IS NOT REACTIVE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.