Product ID:NUBRITE LATEX SEMI-GLOSS HOUSE PAINT WHITE, 333200
MSDS Date:09/11/1992
FSC:8010
NIIN:00N057003
MSDS Number: BXDTW

KYANIZE PAINT

601 S HAVEN ST
BALTIMORE, MD 21224
US

Emergency Phone: 410-342-3641

Info Phone: 410-342-3636

Cage: 85520

KYANIZE PAINT

BALTIMORE, MD 21224 US

Telephone: 800-368-2076

Cage: 85520

1,2-PROPANEDIOL; (PROPYLENE GLYCOL)

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: 5-7.5%

OSHA PEL N/K

ACGIH TLV: N/K

ISOPHTHALONITRILE, TETRACHLORO-; (CHLOROTHALONIL) (SARA

CAS: 1897-45-6

RTECS: NT2600000

Fraction By Weight: .61%

OSHA PEL N/K

ACGIH TLV: N/K

2.019

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

AIRBORN IN FORM OF VAP/DUST. WEAR AN APPROP,

RTECS: 9999999ZZ

APPLICATN UNLESS AIR MONITORING DEMONSTRATES VAP/MIST

RTECS: 9999999ZZ

DIRECTIONS FOR RESPIRATOR USE.

RTECS: 9999999ZZ

DILUTION/LOC EXHST VENT IN VOL & PATTERN TO KEEP TLV

RTECS: 9999999ZZ

FIRE & EXPLO HAZ BELOW STATED LIM & TO REMOVE DECOMP

RTECS: 9999999ZZ

NATURAL RUBBER, NEOPRENE, BUNA OR NITRILE.

RTECS: 9999999ZZ

PROPERLY LAUNDERED.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:REPORTS HAVE ASSOC RPTD & PRLNGD OCCUP
OVEREXP TO SOLVS W/PERM BRAIN & NERV SYS DMG. INTENTIONAL MISUSE BY
DELIB CONC & INHAL CONTENTS MAY BE HARMFUL/FATAL. DO NOT BRTHE
VAPS/SPRAY MIST. PROD HAS LOW TOX BUT IS READILY ABSORBED & CAN
CARRYOTHER MATLS THRU INTACT SKIN. MAY BE HARMFUL IF SWALLOWED.
CAN(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:BE IRRIT TO EYES. MAY CAUSE SKIN
IRRITATION. THIS PRODUCT CONTAINS PIGMENTS WHICH MAY BECOME A DUST
NUISANCE WHEN REMOVED BY ABRASIVE BLASTING, SANDING OR GRINDING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:FLUSH WITH LUKE WARM WATER FOR AT LST 15 MIN. SEEK MD
IMMED. SKIN:FLUSH WASH W/COPIOUS AMTS OF LUKE WARM WATER. REMOVE
CONTAM CLTHG PROMPTLY. CONT MD IMMED. INHAL:REMOVE TO FRESH AIR.
RESTORE BRT HG IF REQ. CONT MD IMMED. INGEST:RINSE MOUTH IMMED.
GIVE EXPOSED INDIVIDUAL 6-8 OZS OF LIQ. (NEVER GIVE ANYTHING BY
MOUTH TO AN UNCON PERSON). DO NOT INDUCE VOMIT UNLESS ADVISED BY
MD. CONT MD IMMED.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROTEC
EQUIP . CNTNRS EXPOSED TO INTENSE HEAT FROM FIRES SHOULD BE COOLED
W/WATER TO PVNT VAP PRESS BUILDUP (SUP DAT)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:DO NOT FLUSH TO SEWER, WATERSHED, OR WATERWAY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP FROM FREEZING. DO NOT STORE ABOVE
120F. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP
OUT OF REACH OF CHILDREN.
Other Precautions:AVOID CONTACT WITH EYES. AVOID SKIN CONTACT. AVOID
PROLONGED OR REPEATED BREATHING OF VAPORS.

Respiratory Protection:IN OUTDOOR/OPEN AREAS USE NIOSH/MSHA APPROVED
MECH FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY
DURING SPRAY APPLICATN. IN RESTRICTED VENT AREAS USE NIOSH/MSHA
APPRVD CHEM-MECH FILTERS DESIGNED TO REMOVE COMBINATION (SUPDAT)
Ventilation:USE VENT AS REQ TO CTL VAP CONCS. IF EXPOS EXCEEDS T.V, USE
NIOSH/MSHA APPRVD RESP TO PVNT OVEREXP. PROVIDE (ING 7)
Protective Gloves:WEAR RESIST GLOVES SUCH AS (ING 9)
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:AN APRON SHOULD BE WORN TO AVOID SKIN
CONTACT.
Work Hygienic Practices:WASH HANDS THORO BEFORE EATING & USING
WASHROOM. REMOVE CONTAM CLTHG IMMED & DO NOT WEAR IT UNTIL IT HAS
BEEN (ING 10)
Supplemental Safety and Health
% VOLAT:67.23(VOL), 53.62(WT). FIRE FIGHT PROC:WHICH COULD RSLT IN
CNTNR RUPTURE. HAZ DECOMP PRODS:OXIDES OF NITROGEN. RESP PROT:OF
PARTICULATE & GAS & VAP. IN CONFINED AREA USE NIOSH/MSHA APPRVD AIR
LINE TYPE RESPS/HOODS. RESP PROT MAY ALSO BE NEC IN ANY LATER
MANUFACTURING OPERATIONS IN WHICH PROD MAY BECOME (ING 4)

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:.50 @ 68F
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN BUAC
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

Stability Indicator/Materials to Avoid:YES
THIS PRODUCT IS INCOMPATIBLE WITH STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ FUMES WHEN HEATED TO
DECOMP AS IN WELDING. FUMES MAY CNTN CARBON MONOXIDE, CARBON
DIOXIDE, & (SUP DAT)

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH APPLICABLE
LOCAL, COUNTY, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.