Product ID:PASTE CATALYST, RTV9858
MSDS Date:02/12/1993
FSC:8040
NIIN:01-397-8848
MSDS Number: BXFXG

GE SILICONES

260 HUDSON RIVER ROAD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: DA POLSINELLI

Cage: GESIL

GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT

WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

STANNANE, DIBUTYLBIS(LAUROYLOXY)-; (DIBUTYLTIN DILAURATE)

CAS: 77-58-7

RTECS: WH7000000

Fraction By Weight: 5-10%

OSHA PEL 0.1 MG SN/M3 SKIN

ACGIH TLV: 0.1 MG SN/M3

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

SILICA, CRYSTALLINE - QUARTZ; (QUARTZ)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 30-60%

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST

DOW CORNING 200 FLUID; (DIMETHYLPOLYSILOXANES)

CAS: 63148-62-9

RTECS: JJ6484500

Fraction By Weight: 30-60%

OSHA PEL N/K

ACGIH TLV: N/K

13 G/L

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL IF SWALLOWED.
SKIN:CAUSES MOD IRRIT. INHAL:CAUSES MOD RESP IRRIT. EYE:MAY CAUSE
SEV IRRIT. OTHER:THIS PRODUCT CONTAINS METHYLPOLYSILOXANES WHICH
CAN GENERATE FORMALDEHYDE AT APPROX 300F (150C) & ABOVE, IN ATMS
WHICH CNTN OXYG. FORMALDEHYDE IS SKIN & RESP SENSITIZER, EYE &
THROAT IRRIT, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLLINE-QUARTZ:IARC
MONOGRAPHS, SUPP. VOL 7, PG 341, 1987:GROUP 2A. NTP 7TH ANNUAL RPT
ON CARCINS,(SUPDAT)
Effects of Overexposure:HLTH HAZS:ACUTE TOXICANT, & POTENTIAL CANCER
HAZARD. AN MSDS FOR FORMALDEHYDE IS AVAILABLE FROM GE SILICONES.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INGEST:INDUCE VOMIT IMMED BY GIVING 2 GLASSES OF WATER &
STICKING FINGERS DOWN THROAT; NEVER GIVE ANYTHING TO AN UNCON
PERSON. GET MED ATTN. SKIN:REMOVE CONTAM CLTHG & LAUNDER BEFORE
REUSE. WASH W/SOA P & WATER. REMOVE CONTAM SHOES & DISCARD. GET MED
ATTN IF IRRIT PERSISTS. INHAL:REMOVE TO FRESH AIR, IF NOT BRTHG
GIVE ARTF RESP, PREF MOUTH-TO-MOUTH. IF BRTHG IS DFCLT GIVE OXYG.
GET MED (SUP DAT)

Flash Point Method:TCC
Flash Point:200F,93C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:SENSITIVITY TO STATIC FIREFIGHTING MEDIA
IS NOT EXPECTED.

Spill Release Procedures:WIPE, SCRAPE/SOAK UP IN AN INERT MATL & PUT IN
CNTNR FOR DISP. WASH WALKING SURFS W/DETERGENT & WATER TO REDUCE
SLIPPING HAZ. WEAR PROPER PROT EQUIP AS SPECIFIED IN CONTROL
MEASURES. WARN OTHER WORKER S OF SPILL. INCREASE AREA VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
AVOID BREATHING VAPORS, IF EXPOSED TO HIGH VAPOR CONCENTRATION,
LEAVE AREA AT ONCE. AVOID CONT W/SKIN & EYES.
Other Precautions:USE ONLY IN WELL VENTILATED AREA. KEEP AWAY FROM FOOD
AND SMOKING MATERIALS. CAUTION!

Respiratory Protection:USE IN A WELL VENTILATED AREA. USE APPROVED
NIOSH/MSHA RESPIRATORY PROTECTION IF TLV EXCEEDED....OR OVER
EXPOSURE IS LIKELY.
Ventilation:USE IN WELL VENT AREA. EXHST VENT. LOCALIZED VENT SHOULD BE
USED TO CTL DUST LEVELS. MEHCANICAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYEWASH STATIONS & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . RUBBER APRON. WEAR EYE PROTECTION AND
(SUPP DAT)
Work Hygienic Practices:WASH HANDS BEFORE EATING AND SMOKING.
Supplemental Safety and Health
EXPLAN OF CARCIN:ANTICIPATED TO BE CARCINOGEN. FIRST AID
PROC:ATTENTION. EYES:IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT
LEAST 15 MINUTES AND GET MEDICAL ATTENTION IMMEDIATELY AFTER
FLUSHING. EYE P ROT:AND FULL LENGTH FACE SHIELD .OTHER PROT
EQUIP:PROTECTIVE CLOTHING.

HCC:V4
Boiling Pt:B.P. Text:>545F,>285C
Vapor Pres:NEGLIGIBLE
Vapor Density:NEGLIGIBLE
Spec Gravity:1.61 (H*2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE LIQUID, FATTY ACID ODOR.
Percent Volatiles by Volume:<4

Stability Indicator/Materials to Avoid:YES
CONTACT WITH OXIDIZING AGENTS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON DIOXIDE, SILICON DIOXIDE, TIN
FUMES, FORMALDEHYDE.

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.