BXGBR - SPEEDBALL TEXTILE INKS (P/N IN SUPP DATA)
- MSDS: BXGBR
- Manufacturer: HUNT MANUFACTURING INC X ACTO DIV
- Product Name: SPEEDBALL TEXTILE INKS (P/N IN SUPP DATA)
- National Stock Number: 3610-00D003503
Product Identification
Product ID:SPEEDBALL TEXTILE INKS (P/N IN SUPP DATA)
MSDS Date:11/08/1990
FSC:3610
NIIN:00D003503
MSDS Number: BXGBR
Responsible Party
STATESVILLE, NC 28687
US
Emergency Phone: 704-872-9511
Info Phone: 704-872-9511
Cage: 08287
Contractor
Telephone: 704-872-9511
Cage: 08287
Ingredients
CERTIFIED NON-TOXIC PER ASTM D4236. APPROVED FOR THE AP
Fraction By Weight: 100%
Hazards
LD50 LC50 Mixture:PRODUCT'S LD50 (ORAL RAT) WAS NOT STATED
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:MANUFACTURER GAVE 'N/A' FOR
CARCINOGENICITY. HMIS DOES NOT EXPECT IT TO BE CARCINOGENIC.
First Aid
First Aid:CONTACT W/EYES MAY CAUSE MILD IRRITATION:FLUSH W/WATER.
Fire Fighting
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS
(PRESSURE-DEMAND, MSHA/NIOSH APPROVED OR EQUIVALENT) & FULL
PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:MATERIAL CAN SPATTER ABOVE 212F. FILM CAN
BURN.
Accidental Release
Spill Release Procedures:FLOOR MAY BE SLIPPERY. USE CARE TO AVOID
FALLING. TRANSFER TO CONTAINERS FOR RECOVERY OR DISPOSAL. KEEP OUT
OF MUNICIPAL SEWERS & OPEN BODIES OF WATER.
Neutralizing Agent:MFR GAVE NO INFORMATION ON MSDS.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING - PRODUCT MAY
COAGULATE.
Exposure Controls
Respiratory Protection:NONE REQUIRED W/ADEQUATE VENTILATION & NORMAL
OPERATING CONDITIONS.
Ventilation:USE W/ADEQUATE LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:USE PROTECTIVE CREAM WHERE EXCESSIVE SKIN
CONTACT IS LIKELY.
Supplemental Safety and Health
P/N'S COVERED BY THIS MSDS:4560 TO 4697, 47500 TO 47541, 45650 TO
45652, 45720 TO 45723.
Chemical Properties
HCC:N1
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:>212F,>100C
Melt/Freeze Pt:M.P/F.P Text:<32F,<0C
Vapor Pres:17 MM
Vapor Density:<1
Spec Gravity:1.0-1.4
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:DILUTABLE
Appearance and Odor:HIGH VISCOSITY/ACRYLIC EMULSION ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:ONSET OF DECOMPOSITION IS 350F.
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:INCINERATE AT A PERMITTED FACILITY I/A/W CURRENT
FEDERAL, STATE & LOCAL REGULATIONS.
======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.