BXHDM - 2379A DK GRAY R=3.6: COMP A
- MSDS: BXHDM
- Manufacturer: NILES CHEMICAL PAINT CO
- Product Name: 2379A DK GRAY R=3.6: COMP A
- National Stock Number: 8010-01-350-6256
Product Identification
Product ID:2379A DK GRAY R=3.6: COMP A
MSDS Date:12/20/1994
FSC:8010
NIIN:01-350-6256
Kit Part:Y
MSDS Number: BXHDM
Responsible Party
NILES, MI 49120
US
Emergency Phone: 219-236-5856
Info Phone: 616-683-3377
Preparer: MIKE LICHATOWICH
Cage: 02388
Contractor
Telephone: 616-683-3377/219-236-5856
Cage: 02388
Ingredients
TALC
CAS: 14807-96-6
Fraction By Weight: 30%
BUTYL ALCOHOL (SARA 313) (CERCLA) (VAPOR PRESSURE 4.4 MM HG
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 30%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
POLYAMIDE/EPOXY ADDUCT
Fraction By Weight: 19.5%
AMIDOAMINE RESIN
CAS: 68443-08-3
Fraction By Weight: 1%
XYLENE (SARA 313) (CERCLA) (VAPOR PRESSURE 7.0 MM HG @
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 1%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM;STEL 150 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PROPRIETARY INGREDIENTS (MFR STATES UNIDENTIFIED
Fraction By Weight: BALANCE
3.50 LBS/GAL
RTECS: 9999999VO
Fire Fighting
Flash Point Method:TCC
Flash Point:79.0F,26.1C
Lower Limits:1.0
Upper Limits:11.0
Extinguishing Media:DRY CHEMICAL, FOAM, CO2
Fire Fighting Procedures:WEAR SCBA W/FULL FACPIECE (POSITIVE PRESSURE
MODE) & FULL PROTECT CLOTH. USE WATER TO COOL CLOSED CNTNR TO
PREVENT PRESSURE BLDUP/AUTO IGNIT/EXPLOSION W/HEAT.
Unusual Fire/Explosion Hazard:KEEP CNTNR CLSD.VAPOR HEAVY,TRAVEL ON
GRND TO IGNIT.KEEP FROM HEAT/IGNIT.CLSD CNTNR EXPLODE W/HEAT.APPLIC
TO HOT SRFCS REQ SPCL CAUTN.DECOMP PRODUCT-HEALTH HZD.
Exposure Controls
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:242 TO 325F
Vapor Density:> AIR
Spec Gravity:1.347
Viscosity:98 - 111 KU
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SLIGHT
Appearance and Odor:LIQUID, ODOR OF SOLVENTS
Percent Volatiles by Volume:51.89
Corrosion Rate:MINIMAL
Stability
Stability Indicator/Materials to Avoid:YES
WILL SOFTEN POLYETHYLENE, OLYPROPYLENE, VC CONTAINERS, OXIDIZERS.
Stability Condition to Avoid:HIGH TEMPERATURES
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.