Product ID:ELAST-A-BOND V/A COATING, E 400
MSDS Date:06/01/1992
FSC:8030
NIIN:00N017977
MSDS Number: BXHTH

EVR-GARD COATINGS CO

16400 GARFIELD AVE
PARAMOUNT, CA 90723
US

Emergency Phone: 310-531-0131

Info Phone: 310-531-0131

Cage: 5G582

EVR-GARD COATINGS CO

PARAMOUNT, CA 90723 US

Telephone: 310-531-0131

Cage: 5G582

0.1 @ 68F

CAS: 107-21-1

RTECS: KW2975000

OSHA PEL N/K

ACGIH TLV: 50 PPM, VAPOR, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

126 G/L

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE HEADACHE &
NAUSEA, DIZZINESS. SKIN & EYE CONTACT: PRIMARILY AN IRRITANT.
REDNESS OR RASH ON SKIN. INGESTION: NAUSEA, DIZZINESS, HEADACHE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED CONTACT WITH MATERIAL MAY
CAUSE DERMATITIS.

First Aid:INHAL: REMOVE TO FRESH AIR. EYES: FLUSH EYES WITH CLEAN WATER
FOR AT LEAST 15 MINUTES. SKIN: REMOVE SATURATED CLOTHING. WASH SKIN
WITH PLENTY OF SOAPY WATER THOROUGHLY. INGEST: INDUCE VOMITING WITH
1- OZ OF SYRUP OF IPECAC FOLLOWED IN 5 MINUTES WITH A GLASS OF
WATER. CALL MD.

Lower Limits:0.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL,
WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . THIS IS A WATER-BASED PRODUCT. WILL NOT
SUPPORT COMBUSTION.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:ABSORB SPILL WITH ANY ABSORBENT MATERIAL -
SAWDUST, SAND, CLAY, ETC. AND FLUSH SPILL AREA WITH LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:THIS PRODUCT IS STABLE UNDER NORMAL
USE AND STORAGE CONDITIONS. KEEP OUT OF REACH OF CHILDREN. KEEP
FROM FREEZING.
Other Precautions:DO NOT TAKE INTERNALLY.

Respiratory Protection:USE OF NIOSH/MSHA APPROVED MASKS DURING
APPLICATION TO AVOID EXCESSIVE INHALATION OF VAPORS IS HIGHLY
RECOMMENDED. OPEN WINDOWS & DOORS OR USE OTHER MEANS TO INSURE
FRESH AIR ENTRY DURING APPLICATION AND DRYING.
Ventilation:PROVIDE ADEQ VENT AT ALL TIMES DURING HNDLG & APPLICATION
OF THIS PROD. INSURE ADEQ SUPPLY OF FRESH AIR AT ALL TIMES.
Protective Gloves:BUNA N.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:PREVENT PROLONGED CONTACT WITH THE MATERIAL.
Work Hygienic Practices:OBSERVE STANDARD HYGIENIC PRACTICES WHEN
HANDLING THIS PRODUCT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.4 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:THICK LIQUID, WHITE AND COLORS; SLIGHT AMMONIA
SMELL.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALIS AND MATERIALS THAT REACT WITH WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURE AREAS.
Hazardous Decomposition Products:NONE.

Waste Disposal Methods:PLACE ALL HAZARDOUS WASTES, INCLUDING ABSORBENTS
USED FOR SPILLS IN 55-GALLON METAL DRUMS AND DISPOSE IN APPROVED
DUMPSTERS IN ACCORDANCE WITH PRESCRIBED FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.