BXJMK - LATEX FLAT, 20000

  • MSDS: BXJMK
  • Manufacturer: LANDMARK COATINGS INC
  • Product Name: LATEX FLAT, 20000
  • National Stock Number: 8010-00N059494
Product Identification

Product ID:LATEX FLAT, 20000
MSDS Date:04/01/1988
FSC:8010
NIIN:00N059494
MSDS Number: BXJMK

Responsible Party
LANDMARK COATINGS, INC
1306 BALLENTINE BLVD
NORFOLK, VA 23504
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 804-622-4155

Preparer: WBL/RB

Cage: 0LA46

Contractor
LANDMARK COATINGS INC
NORFOLK, VA 23504 US

Telephone: 800-424-9300 CHEMTREC

Cage: 0LA46

Ingredients

NON-HAZARDOUS INGREDIENTS

OSHA PEL N/K

ACGIH TLV: N/K


0.40 LB/GL (48 GR/LT)

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION/SKIN/EYE/SKIN
ABSORPTION/INGESTION:NOT APPLICABLE (MFR).
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:UNKNOWN.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . SKIN:FLUSH W/COPIOUS
AMOUNTS OF WATER. CALL MD . EYES:FLUSH WITH CLEAN WATER FOR AT L
EAST 15 MINUTES IF IRRITATION PERSISTS.CALL PHYSICIAN.

Fire Fighting

Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:FLUSH WITH WATER. ABSORB WITH RAGS OR
ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT THROW OR DROP CONTAINERS.
Other Precautions:DO NOT TAKE INTERNALLY. CLOSE CONTAINER EACH USE.
AVOID CONTACT WITH EYES AND PROLONGED CONTACT WITH SKIN OR
BREATHING OF SPRAY MIST. KEEP AWAY FROM CHILDREN.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NOT APPLICABLE.
Ventilation:NOT APPLICABLE.
Protective Gloves:WATERPROOF DURING REPEATED CONTACT.
Eye Protection:ANSI APPROVED CHEMICAL WORKER .
Other Protective Equipment:NOT APPLICABLE.
Work Hygienic Practices:NOT APPLICABLE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Vapor Pres:SEE INGS
Spec Gravity:1.3 (H*2O=1)
Solubility in Water:YES
Appearance and Odor:LATEX PAINT

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:CONVENTIONAL METHODS IN COMPLIANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.