BZZLP - M-BOND 600 ADHESIVE

  • MSDS: BZZLP
  • Manufacturer: MEASUREMENTS GROUP INC
  • Product Name: M-BOND 600 ADHESIVE
  • National Stock Number: 6850-00N008549
Product Identification

Product ID:M-BOND 600 ADHESIVE
MSDS Date:12/15/1986
FSC:6850
NIIN:00N008549
MSDS Number: BZZLP

Responsible Party
MEASUREMENTS GROUP INC
RALEIGH, NC 27611
US

Emergency Phone: 919-365-3800

Info Phone: 919-365-3800

Cage: 88952

Contractor
MEASUREMENTS GROUP INC
WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

Ingredients

FURAN, TETRAHYDRO-; (TETRAHYDROFURAN) (CERCLA)

CAS: 109-99-9

RTECS: LU5950000

Fraction By Weight: 50.3%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/250STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


EPOXY NOVOLAC RESIN

Fraction By Weight: 36.2%

OSHA PEL N/K

ACGIH TLV: N/K


2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA 313) (CERCLA)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 13.5%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:SEE INGREDIENT 3.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: ACUTE OVEREXP MAY INDUCE
NARCOSIS AND/OR LOSS OF CONSCIOUSNESS. MAY BE A SKIN SENSITIZER TO
SOME PERS. INHAL: NAUSEA, VOMITING, HEADACHE, AND/OR LOSS OF
CONSCIOUSNESS. EYES: TEARING, IRRIT, RED NESS. SKIN: IRRITATION,
DEFATTING, AND DERMATITIS. CHRONIC: CHRONIC OVEREXPOSURE MAY
INCLUDE KIDNEY AND/OR LIVER DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
ADMINISTER OXYGEN. IF BREATHING HAS STOPPED, ADMINISTER ARTIFICIAL
RESPIRATION AND OXYGEN. EYES: FLUSH EYES AND LID AREAS FOR AT LEAST
15 MI NUTES WITH WATER. INGESTION: IF CONSCIOUS, IMMEDIATELY INDUCE
VOMITING. SKIN: WASH AFFECTED AREA WITH SOAP AND WATER. FLUSH
THOROUGHLY. IN ALL CASES, SEEK MEDICAL AID.

Fire Fighting

Flash Point Method:PMCC
Flash Point:6F,-14C
Lower Limits:1.8%
Upper Limits:11.8%
Extinguishing Media:USE ALCOHOL FOAM, DRY CHEMICAL, CARBON DIOXIDE.
WATER MAY BE INEFFECTIVE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . COOL FIRE-EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:VAPS MAY FLOW ALONG SURFACES TO DISTANT
IGNITION SOURCES & FLASH BACK. SEALED CONTRS MAY EXPLODE WHEN
EXPOSED TO HIGH HEAT. STRONG OXIDIZERS CAN CAUSE IGNITION.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. WIPE UP WITH
ABSORBENT MATERIAL SUCH AS SAND OR VERMICULITE. FLUSH AFFECTED AREA
WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE BELOW 80F (27C) IN A DRY,
WELL-VENTILATED, FLAMMABLE LIQUID AREA.
Other Precautions:KEEP CONTAINERS TIGHTLY SEALED. AVOID PROLONGED
EXPOSURE TO VAPORS AND SKIN CONTACT.

Exposure Controls

Respiratory Protection:FOR EMERGENCY USE ABOVE 1000 PPM, USE NIOSH/MSHA
APPROVED SCBA. FOR EMERGENCY USE TO 1000 PPM, USE NIOSH/MSHA
APPROVED ORGANIC VAPOR CARTRIDGE RESPIRATOR.
Ventilation:USE GENERAL OR LOCAL EXHAUST TO MEET TLV REQUIREMENTS.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:IMPERVIOUS OVER-CLOTHING AS NEEDED.
EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER USING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:151F,66C
Vapor Pres:145
Vapor Density:2.5
Spec Gravity:0.9 (H*2O=1)
Evaporation Rate & Reference:14.5 (BUTYL ACETATE=1)
Solubility in Water:APPRECIABLE (>50%)
Appearance and Odor:COLORLESS LIQUID, WITH ETHER-LIKE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SOURCES OF IGNITION.
Hazardous Decomposition Products:OXIDES OF CARBON, EXPLOSIVE PEROXIDES,
NITROGEN.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.