Product ID:M-BOND 200 ADHESIVE
MSDS Date:07/31/1995
FSC:8040
NIIN:01-027-1893
Kit Part:Y
MSDS Number: CBTCV

MEASUREMENTS GROUP INC

RALEIGH, NC 27611
US

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 919-365-3800

Preparer: R.L. FRIDLEY

Cage: 88952

MEASUREMENTS GROUP INC

WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

METHYL 2-CYANOACRYLATE

CAS: 137-05-3

RTECS: AS7000000

Fraction By Weight: 80-95%

OSHA PEL 2 PPM

ACGIH TLV: 2 PPM/4 STEL; 9596

POLYMETHYLMETHACRYLATE

CAS: 9011-14-7

RTECS: TR0400000

Fraction By Weight: 5-15%

HYDROQUINONE (SARA 302/313) (CERCLA)

CAS: 123-31-9

RTECS: MX3500000

Fraction By Weight: 0.1-5%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9596

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ETHYL CYANOACRYLATE

CAS: 7085-85-0

Fraction By Weight: 92.5%

SUPERBOND 496=INGREDIENTS 1,2,3; SICOMET 7000=INGREDIENTS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPOR IS IRRITATING TO NOSE &
BRONCHIAL PASSAGES. PROLONGED & REPEATED OVER-EXPOSURE TO VAPORS
MAY CAUSE ALLERGIC/ASTHMA-LIKE SYMPTOMS. CONTACT WITH SKIN & EYES
MAY CAUSE BONDING OF SURFACES, MAY CAUS E BURNS UPON
SOLIDIFICATION. INGESTION MAY CAUSE ADHESION/SOLIDIFICATION IN
MOUTH; LIPS MAY STICK TOGETHER.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALATION-IRRITATION OF BRONCHIAL PASSAGES &
NOSE, ASTHMA-LIKE SYMPTOMS. SKIN-BONDING OF SKIN SURFACES, BURNS.
EYES-BONDING OF EYE SURFACES, BURNS. INGESTION-BONDING OF MOUTH &
LIPS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:MOUTH/LIPS/SKIN-IMMERSE BONDED SURFACE IN WARM, SOAPY WATER.
PEEL OR ROLL SURFACES APART; THEN REMOVE ADHESIVE FROM SKIN.
EYES-WASH WITH WARM WATER & APPLY GAUZE PATCH. EYE WILL OPEN IN 1-4
DAYS. DO N OT OPEN THROUGH MANIPULATION. INHALATION-REMOVE TO FRESH
AIR. CALL A PHYSICIAN IF SYMPTOMS PERSIST.INGESTED-DO NOT FORCE
REMOVAL. DO NOT SWALLOW ADHESIVE WHEN IT LOOSENS. SHOULD LIFT IN
12-48 HOURS.

Flash Point Method:TCC
Flash Point:150F,66C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS AND FULL FIRE FIGHTER'S PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:FLOOD WITH WATER TO POLYMERIZE CYANOCRYLATE
AH=DHESIVE AND TO CONTROL PRODUCT VAPORS. SOAK UP WITH INERT
ABBSORBENT OR SCRAPE UP CURED PRODUCT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AT OR BELOW 75F TO MAXIMIZE
SHELF LIFE. AVOID CONTACT WITH SKIN & EYES. AVOID BREATHING VAPORS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR WITH
ORGANIC VAPOR CARTRIDGE OR AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS
REQUIRED. USE IAW 29 CFR 1910.134.
Ventilation:POSITIVE DOWN-DRAFT EXHAUST VENTILATION SHOULD BE PROVIDED
TO MAINTAIN VAPOR CONCENTRATION BELOW TLV(S).
Protective Gloves:POLYETHYLENE. DO NOT USE COTTON.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:POLYETHYLENE APRON RECOMMENDED.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
KEY1=F8. ADHESIVE OF 2 PART ADHESIVE KIT. SEE PNI B FOR CATALYST FOR
ADHESIVE. MFR/WRITER OF MSDS ACTUALLY BUYS 3 DIFFERENT PRODUCTS FOR
THE ADHESIVE- SUPER BONDER 496 BY LOCTITE; SICOMET 7000 BY HENK LE
ADHESIVES; METHYL CYANOACRYLATE ADHESIVE BY CHEMENCE INC.

HCC:V4
Boiling Pt:B.P. Text:>150F,>66C
Vapor Pres:<0.2
Vapor Density:>1
Spec Gravity:1.09
Evaporation Rate & Reference:NOT DETERMINED
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID; PUNGENT ODOR.

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOLS, AMINES, ALKALIES, PEROXIDES, COTTON, WOOL.
Stability Condition to Avoid:HIGH TEMPERATURES (>=150F).
Hazardous Decomposition Products:NONE KNOWN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.