CLQYX - A-1104 PRIMER FOR PLASTISOL COATINGS

  • MSDS: CLQYX
  • Manufacturer: Q C M CO
  • Product Name: A-1104 PRIMER FOR PLASTISOL COATINGS
  • National Stock Number: 8030-01-331-8446
Product Identification

Product ID:A-1104 PRIMER FOR PLASTISOL COATINGS
MSDS Date:05/05/2000
FSC:8030
NIIN:01-331-8446
Status Code:A
MSDS Number: CLQYX

Responsible Party
Q C M CO
930 CENTRAL AVE S
KENT, WA 98032-6105
US

Emergency Phone: 1-800-424-9300

Info Phone: 253-859-0933, FAX 253-859-0935

Preparer: ERNEST CARTER

Cage: 8L872

Contractor
Q C M CO
KENT, WA 98032-6105 US

Telephone: 253-859-0933, FAX 253-859-0935

Cage: 8L872

Ingredients

METHYL ETHYL KETONE

CAS: 78-93-3

RTECS: EL6475000

OSHA PEL 590 MG/M3;200 PPM

ACGIH TLV: 590 MG/M3;200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHANOL

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1900 MG/M3;1000 PPM

ACGIH TLV: 1880 MG/M3;1000 PPM

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION MAY PRODUCE CENTRAL NERVOUS
SYSTEM DEPRESSION.
Effects of Overexposure:EFFECTS OF OVEREXPOSURE; SKIN, EYE, RESPIRATORY
AND GASTROINTESTINAL IRRITATION, POSSIBLY SEVERE, EXCESSIVE
INHALATION MAY PRODUCE CENTRAL NERVOUS SYSTEM DEPRESSION.

First Aid

First Aid:EYE CONTACT:IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR
AT LEAST 15 MINUTES. SEEK MEDICAL ATTENTION. SKIN CONTACT: REMOVE
CONTAMINATED CLOTHING. WASH THOROUGHLY WITH SOAP AND WATER.
INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN IF NECESSARY.
INGESTION: SEEK IMMEDIATE MEDICAL ATTENTION. DO NOT INDUCE
VOMITING.

Fire Fighting

Flash Point Method:TCC
Flash Point:=-8.7C, 16.F
Lower Limits:1.8%
Upper Limits:19.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS WITH
FULL FACEPIECE. COOL CONTAINERS IN VICINITY WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:KEEP ALL IGNITION SOURCES AWAY. GROUND
ALL CONTAINERS. VAPORS MAY TRAVEL TO SOURCE OF IGNITION AND CAUSE
FLASHBACK. FIRE CAUSES ACID SMOKE AND/OR FUMES.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. SMALL SPILLS:
TAKE UP WITH ABSORBENT MATERIAL. LARGE SPILLS: DAM AND RECOVER.

Handling

Handling and Storage Precautions:AVOID HIGH TEMPERATURE AREA AND
IGNITION SOURCES. ALL HANDLING EQUIPMENT SHOULD BE GROUNDED AND
EXPLOSION PROOF. AVOID ALL PERSONAL CONTACT. WASH THOROUGHLY AFTER
HANDLING.
Other Precautions:DOT CLASS: FLAMMABLE LIQUID (METHYL ETHYL KETONE).
HAZARD IDENTITY: HEALTH 12: FLAMMABILITY13: REACTIVITY10:
CONTACT:H:

Exposure Controls

Respiratory Protection:USE APPROVED SELF CONTAINED BREATHING APPARATUS
IF NECESSARY.
Ventilation:LOCAL EXHAUST: NECESSARY MECHANICAL (GENERAL) NECESSARY.
Protective Gloves:RUBBER OR NEOPRENE.
Eye Protection:CHEMICAL SPLASH GOGGLE.
Other Protective Equipment:SAFETY SHOWER. EYE WASH STATION.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:=73.9C, 165.F
Vapor Pres:4.6
Vapor Density:2.4
Spec Gravity:0.86
VOC Pounds/Gallon:692
VOC Grams/Liter:5.78
Solubility in Water:APPRECIABLE
Appearance and Odor:CLEAR TO AMBER LIQUID, KETONE ODOR.
Percent Volatiles by Volume:86%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:STRONG ACIDS OR OXIDIZERS, HIGH
TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
MISCELLANEOUS HYDROCARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:ACCORDING TO STATE, FEDERAL, AND LOCAL
REGULATIONS. HAZARDOUS WASTE CODE: F005,D001.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.