CDCNX - 688105 LUCITONE 199 POWDER
- MSDS: CDCNX
- Manufacturer: DENTSPLY YORK DIV (TRUBYTE)
- Product Name: 688105 LUCITONE 199 POWDER
- National Stock Number: 6520-01-297-4368
Product Identification
Product ID:688105 LUCITONE 199 POWDER
MSDS Date:06/03/1994
FSC:6520
NIIN:01-297-4368
MSDS Number: CDCNX
Responsible Party
YORK, PA 17405
US
Emergency Phone: 717-845-7511
Info Phone: 717-845-7511
Cage: 16969
Contractor
Telephone: 717-845-7511
Cage: 16969
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION
First Aid
First Aid:INHALATION:REMOVE TO FRESH AIR. EYES: FLUSH W/WATER FOR 5
MINS. SKIN: WASH W/SOAP & WATER. INGESTION: RINSE W/WATER. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:579.2F
Extinguishing Media:WATER CARBON DIOXIDE, DRY CHEMICAL, HALON
Fire Fighting Procedures:AVOID EXTINGUISHING METHODS WHICH MAY GENERATE
DUST CLOUDS. WATER STREAM CAN DISPERSE DUST IN AIR, POSING AN
EXPLOSION HAZARD.
Unusual Fire/Explosion Hazard:POLYMER DUST IS COMBUSTIBLE. EXPLOSIVE
LIMIS OF HTE POLYMER PARTICLES SUSPENDED IN AIR ARE APPROXIMATELY
THOSE OF COAL DUST. WEAR SCBA.
Accidental Release
Spill Release Procedures:SWEEP UP TO AVOID SLIPPING HAZARD KEEP
AIRBORNE PARTICULATE AT MINIMUM WHEN CLEANING UP.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY PLACE. KEEP
CONTAINER CLOSED TO PREVENT WATER ABSORPTION/CONTAMINATION.
Exposure Controls
Respiratory Protection:NUISANCE DUST TYPE IF NEEDED
Ventilation:LOCAL EXHAUST
Supplemental Safety and Health
Chemical Properties
Solubility in Water:INSOLUBLE
Appearance and Odor:PINK FREE FLOWING POWDER W/FAINT ODOR IN BULK
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:572F
Hazardous Decomposition Products:METHYLMETHACRYLATE & CO
Conditions to Avoid Polymerization:572F
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.