BBBMQ - GLIDDEN WALL CONDITIONER
- MSDS: BBBMQ
- Manufacturer: SCM GLIDDEN COATINGS AND RESINS DIV
- Product Name: GLIDDEN WALL CONDITIONER
- National Stock Number: 6850-00B070008
Product Identification
Product ID:GLIDDEN WALL CONDITIONER
MSDS Date:11/03/1987
FSC:6850
NIIN:00B070008
MSDS Number: BBBMQ
Responsible Party
CLEVELAND, OH 44115
US
Emergency Phone: 216826-5566
Cage: DO862
Contractor
Telephone: 216-344-8000
Cage: DO862
Ingredients
GLYCOLS,POLYETHYLENE,MONO
CAS: 9036-19-5
RTECS: MN0907600
Fraction By Weight: 1%
KAOLIN
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: 8%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:IRRITATION OF EYES,SKIN,RESPIRATORY TRACT.
First Aid
First Aid:REMOVE TO FRESH AIR.RESTORE AND SUPPORT CONTINUED
BREATHING.GET MEDICAL ATTENTION.SKIN CONTACT:WASH OFF QUICKLY
W/PLENTY OF WATER,THEN SOAP AND WATER;REMOVE CONTAMINATED
CLOTHING.WASH CONTAMINATED CLO THING BEFORE RE-USE.EYE
CONTACT:FLUSH IMMEDIATELY W/LARGE AMOUNTS OF WATER,EXPECIALLY UNDER
LIDS FOR AT LEAST 15 MIN.GET MEDICAL TREATMENT.INGESTION:IF
SWALLOWED,GET MEDICAL ATTEN.
Fire Fighting
Flash Point:ABOVE 200 F
Extinguishing Media:DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER MAY BE USED TO COOL AND PROTECT EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
EXTREME HEAT.
Accidental Release
Spill Release Procedures:COMPLY WITH ALL APPLICABLE HEALTH AND
ENVIRONMENTAL REGULATIONS.VENTILATE AREA.SPILLS MAY BE PICKED UP
W/ABSORBENT MATERIAL.LARGE SPILLS:SHUT OFF LEAK IF SAFE TO DO
SO.DIKE AND CONTAIN SPILL.PUMP TO S TORAGE OR SALVAGE VESSELS.RINSE
WATER OUT OF SEWER
Handling
Handling and Storage Precautions:STORE BELOW 100 F.
Other Precautions:USE ONLY W/ADEQUATE VENTILATION.DO NOT TAKE
INTERNALLY.KEEP OUT OF REACH OF CHILDREN.AVOID CONTACT W/SKIN AND
EYES,AND BREATHING OF VAPORS.WASH HANDS THOROUGHLY AFTER
HANDLING.KEEP CONTAINERS CLOSED A ND UPRIGHT.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS IN
ACCORDANCE W/OSHA STANDARD 29 CFR 1910.134.
Ventilation:PROVIDE DILUTION VENTILATION OR LOCAL EXHAUST TO PREVENT
BUILD-UP OF VAPORS.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:EYE WASH,SAFETY SHOWER
Work Hygienic Practices:WASH HANDS AFTER HANDLING,ESPECIALLY BEFORE
SMOKING AND EATING.
Supplemental Safety and Health
EMPTY CONTAINERS MAY CONTAIN HAZARDOUS RESIDUE.WEAR A DUST MASK TO
AVOID BREATHING OF SANDING DUST.
Chemical Properties
Percent Volatiles by Volume:85.36
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS,REDUCING AGENTS
Stability Condition to Avoid:ELEVATED TEMPERATURES
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
REGULATIONS.AVOID DISCHARGE TO NATURAL WATERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.